Wet-chemical synthesis of monodispersed barium titanate particles - Hydrothermal conversion of TiO2 microspheres to nanocrystalline BaTiO3

Michael Z.C. Hu, Vino Kurian, E. Andrew Payzant, Claudia J. Rawn, Rodney D. Hunt

Research output: Contribution to journalArticlepeer-review

112 Scopus citations

Abstract

A low-temperature hydrothermal reaction scheme has been developed to produce pure, ultrafine, uniform-sized, nanocrystalline barium titanate (BaTiO3) microspheres from two inorganic precursors: synthesized titania microspheres and barium hydroxide solutions. The size and morphology of titania (TiO2) microspheres were controlled using isopropanol to fine-tune the dielectric constant of the isopropanol-water mixed solvent system. Monodispersed titania microspheres approximately 0.1-1 μm in diameter were successfully synthesized for the further conversion to barium titanate. Barium titanate and titania microspheres were characterized by scanning electron microscopy (SEM) and room-temperature X-ray diffraction (RTXRD). High-temperature XRD (HTXRD) was also utilized for in situ study of the phase transformations and changes of crystallite size with calcination temperatures. The titania microspheres were predominant in the anatase (plus some brookite) phase at room temperature and were converted to the rutile phase when the calcination temperature was increased from 650°C to 900°C. Monodispersed barium titanate microspheres were successfully synthesized from optimized titania via a hydrothermal reaction (≤100°C) in barium hydroxide solutions. The size and morphology of the barium titanate particles remained the same as the precursor titania particles, indicating a 'shrinking-core' diffusion-reaction mechanism. Barium carbonate in the form of witherite was also found along with the formation of barium titanate, especially under conditions with higher Ba/Ti ratios, but a formic acid washing procedure effectively removed this impurity phase from the barium titanate samples. The as-prepared barium titanate was in the cubic nanocrystalline form and did not change when the temperature was increased from room temperature to as high as 750°C. The cubic phase was also stable at high temperatures for over 5 h. Copyright (C) 2000 Elsevier Science S.A.

Original languageEnglish
Pages (from-to)2-14
Number of pages13
JournalPowder Technology
Volume110
Issue number1-2
DOIs
StatePublished - May 1 2000

Funding

This research was supported by the Division of Materials Sciences, Office of Basic Energy Sciences, US Department of Energy and sponsored by the Assistant Secretary for Energy Efficiency and Renewable Energy, Office of Transportation Technologies, as part of the High Temperature Materials Laboratory User Program, Oak Ridge National Laboratory is managed by Lockheed Martin Energy Research for the US Department of Energy under contract DE-AC05-96OR22464.

Keywords

  • Barium titanate
  • Hydrothermal
  • Monodispersed particles
  • Powders
  • Titania

Fingerprint

Dive into the research topics of 'Wet-chemical synthesis of monodispersed barium titanate particles - Hydrothermal conversion of TiO2 microspheres to nanocrystalline BaTiO3'. Together they form a unique fingerprint.

Cite this