Tritium aspects of fueling and exhaust pumping in magnetic fusion energy

Research output: Contribution to journalArticlepeer-review

1 Scopus citations

Abstract

Magnetically confined fusion plasmas generate energy from deuterium-tritium (DT) fusion reactions that produce energetic 3.5 MeV alpha particles and 14 MeV neutrons. Since the DT fusion reaction rate is a strong function of plasma density, an efficient fueling source is needed to maintain high plasma density in such systems. Energetic ions in fusion plasmas are able to escape the confining magnetic fields at a much higher rate than the fusion reactions occur, thus dictating the fueling rate needed. These lost ions become neutralized and need to be pumped away as exhaust gas to be reinjected into the plasma as fuel atoms. The technology to fuel and pump fusion plasmas has to be inherently compatible with the tritium fuel. An ideal holistic solution would couple the pumping and fueling such that the pump exhaust is directly fed back into pellet formation without including impurity gases. This would greatly reduce the processing needs for the exhaust. Concepts to accomplish this are discussed along with the fueling and pumping needs for a DT fusion reactor.

Original languageEnglish
Pages (from-to)256-260
Number of pages5
JournalFusion Science and Technology
Volume71
Issue number3
DOIs
StatePublished - Apr 2017

Funding

This work was supported by the Oak Ridge National Laboratory managed by UT-Battelle, LLC for the US Department of Energy under DE-AC05-00OR22725.

Keywords

  • Fueling
  • Pumping
  • Tritium

Fingerprint

Dive into the research topics of 'Tritium aspects of fueling and exhaust pumping in magnetic fusion energy'. Together they form a unique fingerprint.

Cite this