Transport of tungsten to collector probes in DIII-D

S. Zamperini; D. Donovan; E. Unterberg; P. Stangeby; J. Nichols; J. Duran; D. Elder; A. Neff; D. Rudakov; M. Zach

doi:10.1016/j.nme.2018.12.013

Transport of tungsten to collector probes in DIII-D

S. Zamperini, D. Donovan, E. Unterberg, P. Stangeby, J. Nichols, J. Duran, D. Elder, A. Neff, D. Rudakov, M. Zach

Research output: Contribution to journal › Article › peer-review

12 Scopus citations

Abstract

Collector probes have long been used to measure impurity fluxes in the scrape off layer (SOL) of tokamaks. In this study, collector probes were inserted in the main SOL of DIII-D during the tungsten Metal Rings Campaign, and the W deposits on the probes were analyzed ex situ using Rutherford backscattering spectrometry analysis to obtain radial profiles of W deposition. A simple picture is hypothesized for how the W transports through the SOL from the target to the two sides of the probe, based on a long-theorized impurity accumulation at the crown (i.e. the top) of the plasma. The patterns observed in the deposition profiles along the probes support the hypothesized picture; however, 3D modeling and further experimental studies are needed to support more definitive conclusions.

Original language	English
Pages (from-to)	87-92
Number of pages	6
Journal	Nuclear Materials and Energy
Volume	18
DOIs	https://doi.org/10.1016/j.nme.2018.12.013
State	Published - Jan 2019

Funding

This work was supported by the US Department of Energy under DE-SC0016318 (UTK), DE-AC05-00OR22725 (ORNL), DE-FG02-07ER54917 (UCSD), DE-FC02-04ER54698 (General Atomics), DE-NA0003525 (SNL).

Funders	Funder number
General Atomics	DE-NA0003525
US Department of Energy	DE-AC05-00OR22725, DE-SC0016318
Oak Ridge National Laboratory	DE-FG02-07ER54917
University of California, San Diego	DE-FC02-04ER54698

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

Access to Document

10.1016/j.nme.2018.12.013

Cite this

@article{30d717ffd4714483937e4edb639629e2,

title = "Transport of tungsten to collector probes in DIII-D",

abstract = "Collector probes have long been used to measure impurity fluxes in the scrape off layer (SOL) of tokamaks. In this study, collector probes were inserted in the main SOL of DIII-D during the tungsten Metal Rings Campaign, and the W deposits on the probes were analyzed ex situ using Rutherford backscattering spectrometry analysis to obtain radial profiles of W deposition. A simple picture is hypothesized for how the W transports through the SOL from the target to the two sides of the probe, based on a long-theorized impurity accumulation at the crown (i.e. the top) of the plasma. The patterns observed in the deposition profiles along the probes support the hypothesized picture; however, 3D modeling and further experimental studies are needed to support more definitive conclusions.",

author = "S. Zamperini and D. Donovan and E. Unterberg and P. Stangeby and J. Nichols and J. Duran and D. Elder and A. Neff and D. Rudakov and M. Zach",

note = "Publisher Copyright: {\textcopyright} 2018 The Authors",

year = "2019",

month = jan,

doi = "10.1016/j.nme.2018.12.013",

language = "English",

volume = "18",

pages = "87--92",

journal = "Nuclear Materials and Energy",

issn = "2352-1791",

publisher = "Elsevier",

}

TY - JOUR

T1 - Transport of tungsten to collector probes in DIII-D

AU - Zamperini, S.

AU - Donovan, D.

AU - Unterberg, E.

AU - Stangeby, P.

AU - Nichols, J.

AU - Duran, J.

AU - Elder, D.

AU - Neff, A.

AU - Rudakov, D.

AU - Zach, M.

PY - 2019/1

Y1 - 2019/1

N2 - Collector probes have long been used to measure impurity fluxes in the scrape off layer (SOL) of tokamaks. In this study, collector probes were inserted in the main SOL of DIII-D during the tungsten Metal Rings Campaign, and the W deposits on the probes were analyzed ex situ using Rutherford backscattering spectrometry analysis to obtain radial profiles of W deposition. A simple picture is hypothesized for how the W transports through the SOL from the target to the two sides of the probe, based on a long-theorized impurity accumulation at the crown (i.e. the top) of the plasma. The patterns observed in the deposition profiles along the probes support the hypothesized picture; however, 3D modeling and further experimental studies are needed to support more definitive conclusions.

AB - Collector probes have long been used to measure impurity fluxes in the scrape off layer (SOL) of tokamaks. In this study, collector probes were inserted in the main SOL of DIII-D during the tungsten Metal Rings Campaign, and the W deposits on the probes were analyzed ex situ using Rutherford backscattering spectrometry analysis to obtain radial profiles of W deposition. A simple picture is hypothesized for how the W transports through the SOL from the target to the two sides of the probe, based on a long-theorized impurity accumulation at the crown (i.e. the top) of the plasma. The patterns observed in the deposition profiles along the probes support the hypothesized picture; however, 3D modeling and further experimental studies are needed to support more definitive conclusions.

UR - http://www.scopus.com/inward/record.url?scp=85058213867&partnerID=8YFLogxK

U2 - 10.1016/j.nme.2018.12.013

DO - 10.1016/j.nme.2018.12.013

M3 - Article

AN - SCOPUS:85058213867

SN - 2352-1791

VL - 18

SP - 87

EP - 92

JO - Nuclear Materials and Energy

JF - Nuclear Materials and Energy

ER -

Transport of tungsten to collector probes in DIII-D

Abstract

Funding

UN SDGs

Access to Document

Other files and links

Fingerprint

Cite this