Abstract
To understand the origins of failure and limited cycle life in lithium-ion batteries (LIBs), it is imperative to quantitatively link capacity-fading mechanisms to electrochemical and chemical processes. This is extremely challenging in real systems where capacity is lost during each cycle to both active material loss and solid electrolyte interphase (SEI) evolution, two indistinguishable contributions in traditional electrochemical measurements. Here, we have used a model system in combination with (1) precision measurements of the overall Coulombic efficiency via electrochemical experiments and (2) x-ray reflectivity measurements of the active material losses. The model system consisted of a 515 Å thick amorphous silicon (a-Si) thin film on silicon carbide in half-cell geometry using a carbonate electrolyte with LiPF6 salt. This approach allowed us to quantify the capacity lost during each cycle due to SEI evolution. Combined with electrochemical analysis, we identify SEI growth as the major contribution to capacity fading. Specifically, the continued SEI growth results in increasing overpotentials due to increased SEI resistance, and this leads to lower extent of lithiation when the cutoff voltage is reached during lithiation. Our results suggest that SEI grows more with increased time spent at low voltages where electrolyte decomposition is favored. Finally, we extracted a proportionality constant for SEI growth following a parabolic growth law. Our methodology allows for the quantitative determination of lithium-ion loss mechanisms in LIBs by separately tracking lithium ions within the active materials and the SEI and offers a powerful method of quantitatively understanding LIB loss mechanisms.
Original language | English |
---|---|
Article number | 084702 |
Journal | Journal of Chemical Physics |
Volume | 152 |
Issue number | 8 |
DOIs | |
State | Published - Feb 28 2020 |
Funding
X-ray reflectivity data collection and analysis, as well as electrochemical characterization and analysis, was supported by the Joint Center for Energy Storage Research (JCESR). We would like to thank Maria R. Lukatskaya (SLAC) for helpful suggestions. We gratefully acknowledge Matthijs van den Berg and Christopher E. D. Chid-sey (Stanford) for kindly providing the initial version of the Teflon cone electrochemical cell and Natalie R. Geise (Stanford/SLAC) for assistance with the initial experiments using this cell. We thank Doug Van Campen and Robert M. Kasse (SLAC) for their assistance during the design and fabrication of the operando XRR cell. Research carried out at Stanford Synchrotron Radiation Lightsource, SLAC National Accelerator Laboratory, was supported by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences, under Contract No. DE-AC02-76SF00515. A portion of this work (growth of thin films) at the Oak Ridge National Laboratory, managed by UT Battelle, LLC, for the U.S. Department of Energy (DOE) under Contract No. DE-AC05-00OR22725, was sponsored by the Office of Energy Efficiency and Renewable Energy (EERE) Vehicle Technologies Office (VTO) (Deputy Director: David How-ell) SEISTA subprogram (Program Manager: Brian Cunningham) (G.M.V.).
Funders | Funder number |
---|---|
Joint Center for Energy Storage Research | |
U.S. Department of Energy | DE-AC05-00OR22725 |
Office of Science | |
Office of Energy Efficiency and Renewable Energy | |
Basic Energy Sciences | DE-AC02-76SF00515 |
Oak Ridge National Laboratory | |
Vehicle Technologies Office | |
UT-Battelle |