Three-dimensional velocity and scalar field measurements of an airfoil trailing edge with slot film cooling: The effect of an internal structure in the slot

Measurements of the 3D velocity and concentration fields were obtained using magnetic resonance imaging for a pressure-side cutback film cooling experiment. The cutback geometry consisted of rectangular slots separated by straight lands; inside each of the slots was an airfoil-shaped blockage. The results from this trailing edge configuration, the "island airfoil," are compared to the results obtained with the "generic airfoil," a geometry with narrower slots, wider, tapered lands, and no blockages. The objective was to determine how the narrower lands and internal blockages affected the average film cooling effectiveness and the spanwise uniformity. Velocimetry data revealed that strong horseshoe vortices formed around the blockages in the slots, which resulted in greater coolant nonuniformity on the airfoil breakout surface and in the wake. The thinner lands of the island airfoil allowed the coolant to cover a larger fraction of the trailing edge span, giving a much higher spanwise-averaged surface effectiveness, especially near the slot exit where the generic airfoil lands are widest.