Test facility for screening and evaluating candidate materials for advanced microturbine recuperators

Edgar Lara-Curzio; P. J. Maziasz; B. A. Pint; Matt Stewart; Doug Hamrin; Nathan Lipovich; Dan DeMore

doi:10.1115/GT2002-30581

Test facility for screening and evaluating candidate materials for advanced microturbine recuperators

Edgar Lara-Curzio, P. J. Maziasz, B. A. Pint, Matt Stewart, Doug Hamrin, Nathan Lipovich, Dan DeMore

Research output: Contribution to conference › Paper › peer-review

25 Scopus citations

Abstract

A test facility for screening and evaluating candidate materials for advanced microturbine recuperators is described. The central piece of the test facility is a modified 60 kW Capstone microturbine that serves as a test bed for subjecting test specimens to conditions of stress, environment and temperature that are representative of those experienced by the recuperator during microturbine operation. Special provisions have been incorporated into the design of this test facility for controlling the magnitude of the applied mechanical stress and the surface temperature of the test specimens with the objective of carrying out accelerated testing. Candidate materials for evaluation in this test facility are identified.

Original language	English
Pages	1135-1141
Number of pages	7
DOIs	https://doi.org/10.1115/GT2002-30581
State	Published - 2002
Event	Proceedings of the ASME Turbo Expo 2002; Aircraft Engine, Coal, Biomass and Alternative Fuels, Combustion and Fuels, Education, Electric Power, Vehicular and Small Turbomachines - Amsterdam, Netherlands Duration: Jun 3 2002 → Jun 6 2002

Conference

Conference	Proceedings of the ASME Turbo Expo 2002; Aircraft Engine, Coal, Biomass and Alternative Fuels, Combustion and Fuels, Education, Electric Power, Vehicular and Small Turbomachines
Country/Territory	Netherlands
City	Amsterdam
Period	06/3/02 → 06/6/02

Access to Document

10.1115/GT2002-30581

Cite this

Lara-Curzio, E., Maziasz, P. J., Pint, B. A., Stewart, M., Hamrin, D., Lipovich, N., & DeMore, D. (2002). Test facility for screening and evaluating candidate materials for advanced microturbine recuperators. 1135-1141. Paper presented at Proceedings of the ASME Turbo Expo 2002; Aircraft Engine, Coal, Biomass and Alternative Fuels, Combustion and Fuels, Education, Electric Power, Vehicular and Small Turbomachines, Amsterdam, Netherlands. https://doi.org/10.1115/GT2002-30581

Lara-Curzio, Edgar ; Maziasz, P. J. ; Pint, B. A. et al. / Test facility for screening and evaluating candidate materials for advanced microturbine recuperators. Paper presented at Proceedings of the ASME Turbo Expo 2002; Aircraft Engine, Coal, Biomass and Alternative Fuels, Combustion and Fuels, Education, Electric Power, Vehicular and Small Turbomachines, Amsterdam, Netherlands.7 p.

@conference{2d521ff31401458b861c295c79a29e8c,

title = "Test facility for screening and evaluating candidate materials for advanced microturbine recuperators",

abstract = "A test facility for screening and evaluating candidate materials for advanced microturbine recuperators is described. The central piece of the test facility is a modified 60 kW Capstone microturbine that serves as a test bed for subjecting test specimens to conditions of stress, environment and temperature that are representative of those experienced by the recuperator during microturbine operation. Special provisions have been incorporated into the design of this test facility for controlling the magnitude of the applied mechanical stress and the surface temperature of the test specimens with the objective of carrying out accelerated testing. Candidate materials for evaluation in this test facility are identified.",

author = "Edgar Lara-Curzio and Maziasz, {P. J.} and Pint, {B. A.} and Matt Stewart and Doug Hamrin and Nathan Lipovich and Dan DeMore",

year = "2002",

doi = "10.1115/GT2002-30581",

language = "English",

pages = "1135--1141",

note = "Proceedings of the ASME Turbo Expo 2002; Aircraft Engine, Coal, Biomass and Alternative Fuels, Combustion and Fuels, Education, Electric Power, Vehicular and Small Turbomachines ; Conference date: 03-06-2002 Through 06-06-2002",

}

Lara-Curzio, E, Maziasz, PJ, Pint, BA, Stewart, M, Hamrin, D, Lipovich, N & DeMore, D 2002, 'Test facility for screening and evaluating candidate materials for advanced microturbine recuperators', Paper presented at Proceedings of the ASME Turbo Expo 2002; Aircraft Engine, Coal, Biomass and Alternative Fuels, Combustion and Fuels, Education, Electric Power, Vehicular and Small Turbomachines, Amsterdam, Netherlands, 06/3/02 - 06/6/02 pp. 1135-1141. https://doi.org/10.1115/GT2002-30581

Test facility for screening and evaluating candidate materials for advanced microturbine recuperators. / Lara-Curzio, Edgar; Maziasz, P. J.; Pint, B. A. et al.
2002. 1135-1141 Paper presented at Proceedings of the ASME Turbo Expo 2002; Aircraft Engine, Coal, Biomass and Alternative Fuels, Combustion and Fuels, Education, Electric Power, Vehicular and Small Turbomachines, Amsterdam, Netherlands.

Research output: Contribution to conference › Paper › peer-review

TY - CONF

T1 - Test facility for screening and evaluating candidate materials for advanced microturbine recuperators

AU - Lara-Curzio, Edgar

AU - Maziasz, P. J.

AU - Pint, B. A.

AU - Stewart, Matt

AU - Hamrin, Doug

AU - Lipovich, Nathan

AU - DeMore, Dan

PY - 2002

Y1 - 2002

N2 - A test facility for screening and evaluating candidate materials for advanced microturbine recuperators is described. The central piece of the test facility is a modified 60 kW Capstone microturbine that serves as a test bed for subjecting test specimens to conditions of stress, environment and temperature that are representative of those experienced by the recuperator during microturbine operation. Special provisions have been incorporated into the design of this test facility for controlling the magnitude of the applied mechanical stress and the surface temperature of the test specimens with the objective of carrying out accelerated testing. Candidate materials for evaluation in this test facility are identified.

AB - A test facility for screening and evaluating candidate materials for advanced microturbine recuperators is described. The central piece of the test facility is a modified 60 kW Capstone microturbine that serves as a test bed for subjecting test specimens to conditions of stress, environment and temperature that are representative of those experienced by the recuperator during microturbine operation. Special provisions have been incorporated into the design of this test facility for controlling the magnitude of the applied mechanical stress and the surface temperature of the test specimens with the objective of carrying out accelerated testing. Candidate materials for evaluation in this test facility are identified.

UR - http://www.scopus.com/inward/record.url?scp=0037003553&partnerID=8YFLogxK

U2 - 10.1115/GT2002-30581

DO - 10.1115/GT2002-30581

M3 - Paper

AN - SCOPUS:0037003553

SP - 1135

EP - 1141

T2 - Proceedings of the ASME Turbo Expo 2002; Aircraft Engine, Coal, Biomass and Alternative Fuels, Combustion and Fuels, Education, Electric Power, Vehicular and Small Turbomachines

Y2 - 3 June 2002 through 6 June 2002

ER -

Lara-Curzio E, Maziasz PJ, Pint BA, Stewart M, Hamrin D, Lipovich N et al.. Test facility for screening and evaluating candidate materials for advanced microturbine recuperators. 2002. Paper presented at Proceedings of the ASME Turbo Expo 2002; Aircraft Engine, Coal, Biomass and Alternative Fuels, Combustion and Fuels, Education, Electric Power, Vehicular and Small Turbomachines, Amsterdam, Netherlands. doi: 10.1115/GT2002-30581

Test facility for screening and evaluating candidate materials for advanced microturbine recuperators

Abstract

Conference

Access to Document

Other files and links

Fingerprint

Cite this