Structure and tribological properties of composite materials based on Al–Cu–Fe formed at high pressure

E. A. Golovkova; E. A. Ekimov; A. S. Ivanov; V. S. Kruglov; A. F. Pal’; A. N. Ryabinkin; A. O. Serov; A. N. Starostin; M. B. Tsetlin

doi:10.1134/S1063785017110050

Structure and tribological properties of composite materials based on Al–Cu–Fe formed at high pressure

E. A. Golovkova, E. A. Ekimov, A. S. Ivanov, V. S. Kruglov, A. F. Pal’, A. N. Ryabinkin, A. O. Serov, A. N. Starostin, M. B. Tsetlin

Research output: Contribution to journal › Article › peer-review

2 Scopus citations

Abstract

The use of high pressure (~8 GPa) in the formation of composite quasi-crystalline materials from powders made it possible to create practically poreless samples with a density close to the maximum known for this type of quasi-crystals. For samples with a nickel binder, sintered at a temperature of 550°C, a very low coefficient of friction was obtained, which retain its value during the testing.

Original language	English
Pages (from-to)	972-975
Number of pages	4
Journal	Technical Physics Letters
Volume	43
Issue number	11
DOIs	https://doi.org/10.1134/S1063785017110050
State	Published - Nov 1 2017
Externally published	Yes

Funding

Acknowledgments. This work was supported by the Russian Science Foundation, project no. 16-12-10511.

Funders	Funder number
Russian Science Foundation	16-12-10511

Access to Document

10.1134/S1063785017110050

Cite this

@article{060cb36ea97f49538b2788ce0f8463fc,

title = "Structure and tribological properties of composite materials based on Al–Cu–Fe formed at high pressure",

abstract = "The use of high pressure (~8 GPa) in the formation of composite quasi-crystalline materials from powders made it possible to create practically poreless samples with a density close to the maximum known for this type of quasi-crystals. For samples with a nickel binder, sintered at a temperature of 550°C, a very low coefficient of friction was obtained, which retain its value during the testing.",

author = "Golovkova, {E. A.} and Ekimov, {E. A.} and Ivanov, {A. S.} and Kruglov, {V. S.} and Pal{\textquoteright}, {A. F.} and Ryabinkin, {A. N.} and Serov, {A. O.} and Starostin, {A. N.} and Tsetlin, {M. B.}",

note = "Publisher Copyright: {\textcopyright} 2017, Pleiades Publishing, Ltd.",

year = "2017",

month = nov,

day = "1",

doi = "10.1134/S1063785017110050",

language = "English",

volume = "43",

pages = "972--975",

journal = "Technical Physics Letters",

issn = "1063-7850",

publisher = "Springer",

number = "11",

}

TY - JOUR

T1 - Structure and tribological properties of composite materials based on Al–Cu–Fe formed at high pressure

AU - Golovkova, E. A.

AU - Ekimov, E. A.

AU - Ivanov, A. S.

AU - Kruglov, V. S.

AU - Pal’, A. F.

AU - Ryabinkin, A. N.

AU - Serov, A. O.

AU - Starostin, A. N.

AU - Tsetlin, M. B.

PY - 2017/11/1

Y1 - 2017/11/1

N2 - The use of high pressure (~8 GPa) in the formation of composite quasi-crystalline materials from powders made it possible to create practically poreless samples with a density close to the maximum known for this type of quasi-crystals. For samples with a nickel binder, sintered at a temperature of 550°C, a very low coefficient of friction was obtained, which retain its value during the testing.

AB - The use of high pressure (~8 GPa) in the formation of composite quasi-crystalline materials from powders made it possible to create practically poreless samples with a density close to the maximum known for this type of quasi-crystals. For samples with a nickel binder, sintered at a temperature of 550°C, a very low coefficient of friction was obtained, which retain its value during the testing.

UR - http://www.scopus.com/inward/record.url?scp=85037160947&partnerID=8YFLogxK

U2 - 10.1134/S1063785017110050

DO - 10.1134/S1063785017110050

M3 - Article

AN - SCOPUS:85037160947

SN - 1063-7850

VL - 43

SP - 972

EP - 975

JO - Technical Physics Letters

JF - Technical Physics Letters

IS - 11

ER -

Structure and tribological properties of composite materials based on Al–Cu–Fe formed at high pressure

Abstract

Funding

Access to Document

Other files and links

Fingerprint

Cite this