TY - JOUR
T1 - Structural and tribological characterization of protective amorphous diamond-like carbon and amorphous CNx overcoats for next generation hard disks
AU - Scharf, T. W.
AU - Ott, R. D.
AU - Yang, D.
AU - Barnard, J. A.
PY - 1999/3/15
Y1 - 1999/3/15
N2 - Further insight into processing-structure-property relationships have been carried out for existing and candidate carbon-based protective overcoats used in the magnetic recording industry. Specifically, 5 nm thick amorphous diamond-like carbon (a:C) and nitrogenated diamond-like carbon (a:CNx) overcoats were deposited by low deposition rate sputtering onto a thin film disk consisting of either CoCrPt/CrV/NiP/AlMg or CoCrPt/CrV/glass. The wear durability and frictional behavior of these hard disks were ascertained using a recently developed depth sensing reciprocating nanoscratch test. It was determined that the CN0.14/CoCrPt/CrV/glass disk exhibited the most wear resistance, least amount of plastic deformation, and lowest kinetic friction coefficient after the last wear event. Core level x-ray photoelectron spectroscopy (XPS) results of sputter cleaned overcoats indicated that nitrogen up to 14 at. % incorporated into the amorphous network resulted in these improvements near the overcoat/magnetic layer interface, since there was an increase in the number of N-sp3 C bonded sites in a predominantly N-sp2 C bonded matrix. However, nonsputter cleaned overcoats exhibited a more graphitic pyridine-like (nondoping configuration) structure near the surface as evidenced by the increase in C=N versus C-N bonds and the valence band XPS determined appearance of the 2p-π band near the Fermi level (EF). Therefore, XPS sputter cleaning revealed a gradient in the chemical nature of the overcoats through the thickness. In addition, micro-Raman spectroscopy established that a further increase of nitrogen (≥ 18 at. %) weakened the overcoat structure due to the formation of terminated sites in the amorphous carbon network, since nitrogen failed to connect the sp2 domains within the network. This, in conjunction with an increase in the intensity of the 2p-π band from the valence band XPS spectra and the increase in the G-band position and ID/IG ratio from the Raman spectra, confirmed the increase in the size and number of sp2 bonds in the CN0.18 overcoat.
AB - Further insight into processing-structure-property relationships have been carried out for existing and candidate carbon-based protective overcoats used in the magnetic recording industry. Specifically, 5 nm thick amorphous diamond-like carbon (a:C) and nitrogenated diamond-like carbon (a:CNx) overcoats were deposited by low deposition rate sputtering onto a thin film disk consisting of either CoCrPt/CrV/NiP/AlMg or CoCrPt/CrV/glass. The wear durability and frictional behavior of these hard disks were ascertained using a recently developed depth sensing reciprocating nanoscratch test. It was determined that the CN0.14/CoCrPt/CrV/glass disk exhibited the most wear resistance, least amount of plastic deformation, and lowest kinetic friction coefficient after the last wear event. Core level x-ray photoelectron spectroscopy (XPS) results of sputter cleaned overcoats indicated that nitrogen up to 14 at. % incorporated into the amorphous network resulted in these improvements near the overcoat/magnetic layer interface, since there was an increase in the number of N-sp3 C bonded sites in a predominantly N-sp2 C bonded matrix. However, nonsputter cleaned overcoats exhibited a more graphitic pyridine-like (nondoping configuration) structure near the surface as evidenced by the increase in C=N versus C-N bonds and the valence band XPS determined appearance of the 2p-π band near the Fermi level (EF). Therefore, XPS sputter cleaning revealed a gradient in the chemical nature of the overcoats through the thickness. In addition, micro-Raman spectroscopy established that a further increase of nitrogen (≥ 18 at. %) weakened the overcoat structure due to the formation of terminated sites in the amorphous carbon network, since nitrogen failed to connect the sp2 domains within the network. This, in conjunction with an increase in the intensity of the 2p-π band from the valence band XPS spectra and the increase in the G-band position and ID/IG ratio from the Raman spectra, confirmed the increase in the size and number of sp2 bonds in the CN0.18 overcoat.
UR - http://www.scopus.com/inward/record.url?scp=0000720680&partnerID=8YFLogxK
U2 - 10.1063/1.369654
DO - 10.1063/1.369654
M3 - Article
AN - SCOPUS:0000720680
SN - 0021-8979
VL - 85
SP - 3142
EP - 3154
JO - Journal of Applied Physics
JF - Journal of Applied Physics
IS - 6
ER -