SNS ring and RTBT beam current monitor

W. Blokland; G. Armstrong; C. Deibele; J. Pogge; V. Gaidash

doi:10.1063/1.2401410

SNS ring and RTBT beam current monitor

W. Blokland, G. Armstrong, C. Deibele, J. Pogge, V. Gaidash

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

2 Scopus citations

Abstract

The SNS Diagnostics Group has implemented Beam Current Monitors (BCM) for the Ring and RTBT (Ring to Target Beam Transferline). In the Ring, the BCM must handle a thousand-fold increase of intensity during the accumulation, and in the RTBT, the BCM must communicate the integrated charge of the beam pulse in real-time for every shot to the target division for correlation with the produced neutrons. This paper describes the development of a four channel solution for the Ring BCM and the use of FPGA for the RTBT BCM to deliver the total charge to the target over a fiber optic network. Both system versions are based on the same commercial digitizer board.

Original language	English
Title of host publication	BEAM INSTRUMENTATION WORKSHOP 2006
Subtitle of host publication	Twelfth Beam Instrumentation Workshop, BIW06
Pages	238-245
Number of pages	8
DOIs	https://doi.org/10.1063/1.2401410
State	Published - 2006
Event	BEAM INSTRUMENTATION WORKSHOP 2006: Twelfth Beam Instrumentation Workshop, BIW06 - Batavia, IL, United States Duration: May 1 2006 → May 4 2006

Publication series

Name	AIP Conference Proceedings
Volume	868
ISSN (Print)	0094-243X
ISSN (Electronic)	1551-7616

Conference

Conference	BEAM INSTRUMENTATION WORKSHOP 2006: Twelfth Beam Instrumentation Workshop, BIW06
Country/Territory	United States
City	Batavia, IL
Period	05/1/06 → 05/4/06

Keywords

Beam current monitor
Data-acquisition
Hardware
Particle accelerator
Software

Access to Document

10.1063/1.2401410

Cite this

@inproceedings{5e1cccd837f74d37958f4176a56dba87,

title = "SNS ring and RTBT beam current monitor",

abstract = "The SNS Diagnostics Group has implemented Beam Current Monitors (BCM) for the Ring and RTBT (Ring to Target Beam Transferline). In the Ring, the BCM must handle a thousand-fold increase of intensity during the accumulation, and in the RTBT, the BCM must communicate the integrated charge of the beam pulse in real-time for every shot to the target division for correlation with the produced neutrons. This paper describes the development of a four channel solution for the Ring BCM and the use of FPGA for the RTBT BCM to deliver the total charge to the target over a fiber optic network. Both system versions are based on the same commercial digitizer board.",

keywords = "Beam current monitor, Data-acquisition, Hardware, Particle accelerator, Software",

author = "W. Blokland and G. Armstrong and C. Deibele and J. Pogge and V. Gaidash",

year = "2006",

doi = "10.1063/1.2401410",

language = "English",

isbn = "0735403694",

series = "AIP Conference Proceedings",

pages = "238--245",

booktitle = "BEAM INSTRUMENTATION WORKSHOP 2006",

note = "BEAM INSTRUMENTATION WORKSHOP 2006: Twelfth Beam Instrumentation Workshop, BIW06 ; Conference date: 01-05-2006 Through 04-05-2006",

}

Blokland, W, Armstrong, G, Deibele, C, Pogge, J & Gaidash, V 2006, SNS ring and RTBT beam current monitor. in BEAM INSTRUMENTATION WORKSHOP 2006: Twelfth Beam Instrumentation Workshop, BIW06. AIP Conference Proceedings, vol. 868, pp. 238-245, BEAM INSTRUMENTATION WORKSHOP 2006: Twelfth Beam Instrumentation Workshop, BIW06, Batavia, IL, United States, 05/1/06. https://doi.org/10.1063/1.2401410

TY - GEN

T1 - SNS ring and RTBT beam current monitor

AU - Blokland, W.

AU - Armstrong, G.

AU - Deibele, C.

AU - Pogge, J.

AU - Gaidash, V.

PY - 2006

Y1 - 2006

N2 - The SNS Diagnostics Group has implemented Beam Current Monitors (BCM) for the Ring and RTBT (Ring to Target Beam Transferline). In the Ring, the BCM must handle a thousand-fold increase of intensity during the accumulation, and in the RTBT, the BCM must communicate the integrated charge of the beam pulse in real-time for every shot to the target division for correlation with the produced neutrons. This paper describes the development of a four channel solution for the Ring BCM and the use of FPGA for the RTBT BCM to deliver the total charge to the target over a fiber optic network. Both system versions are based on the same commercial digitizer board.

AB - The SNS Diagnostics Group has implemented Beam Current Monitors (BCM) for the Ring and RTBT (Ring to Target Beam Transferline). In the Ring, the BCM must handle a thousand-fold increase of intensity during the accumulation, and in the RTBT, the BCM must communicate the integrated charge of the beam pulse in real-time for every shot to the target division for correlation with the produced neutrons. This paper describes the development of a four channel solution for the Ring BCM and the use of FPGA for the RTBT BCM to deliver the total charge to the target over a fiber optic network. Both system versions are based on the same commercial digitizer board.

KW - Beam current monitor

KW - Data-acquisition

KW - Hardware

KW - Particle accelerator

KW - Software

UR - http://www.scopus.com/inward/record.url?scp=33847080066&partnerID=8YFLogxK

U2 - 10.1063/1.2401410

DO - 10.1063/1.2401410

M3 - Conference contribution

AN - SCOPUS:33847080066

SN - 0735403694

SN - 9780735403697

T3 - AIP Conference Proceedings

SP - 238

EP - 245

BT - BEAM INSTRUMENTATION WORKSHOP 2006

T2 - BEAM INSTRUMENTATION WORKSHOP 2006: Twelfth Beam Instrumentation Workshop, BIW06

Y2 - 1 May 2006 through 4 May 2006

ER -

SNS ring and RTBT beam current monitor

Abstract

Publication series

Conference

Keywords

Access to Document

Other files and links

Fingerprint

Cite this