Abstract
Fuel cladding chemical interaction (FCCI) occurred on the interface between the nuclear metal fuel and cladding is the primary cause of cladding wastage, weakening cladding mechanical integrity, and placing fuel and cladding at risk. Although the microstructural and phase information of FCCI has been fairly understood, mechanical properties remain less studied due to limited reaction volume. Through a combining of advanced electron microscopy characterizations and small-scale mechanical testing techniques, including indentation and micro-tensile testing, this study investigated the microscale mechanical properties of FCCI between the high-Cr tempered martensitic HT9 cladding and an advanced Uranium (U)-based metallic fuel irradiated at the Advanced Test Reactor to 2.2% FIMA with peak inner cladding temperature (PICT) reached to 650 ℃. Mechanical testing results show significant hardening and embrittlement in the FCCI region. The brittle fracture of FCCI specimen is mainly attributed to the formation of nano-crystallized intermetallic σ-FeCr phase. Whereas mechanical softening was revealed in the unreacted HT9 matrix due to irradiation-induced microstructural and microchemical evolution, specifically, the disappearance of martensitic lath structure and the formation of Fe2Mo Laves phase precipitation which consumed the solid solution strengthening Mo from the HT9 matrix. Due to the achieved high cladding temperature, this fuel pin is of particular significance for revealing the high-temperature irradiation effect on the mechanical properties of HT9 cladding. Therefore, the outcomes of this study are expected to contribute to the development of multi-scale mechanical behavior modeling of HT9 cladding for Generation IV reactors which requires cladding to run at higher temperature (above 600 ℃).
| Original language | English |
|---|---|
| Article number | 153754 |
| Journal | Journal of Nuclear Materials |
| Volume | 566 |
| DOIs | |
| State | Published - Aug 1 2022 |
Funding
Y. Wang, F. Cappia, and L. Capriotti acknowledge the partial finance support from the U.S. Department of Energy , Office of Nuclear Energy under DOE Idaho Operations Office Contract DEAC07-051D14517 as part of a Nuclear Science User Facilities, Rapid Turnaround Experiment Proposal (NSUF-RTE, FY-2019 1st call, #1680 and FY-2021 1st call, #4345). This work was also supported by LDRD project of 22A1059-094FP. Accordingly, the U.S. Government retains and the publisher, by accepting the article for publication, acknowledges that the U.S. Government retains a nonexclusive, paid-up, irrevocable, worldwide license to publish or reproduce the published form of this manuscript or al- low others to do so, for U.S. Government purposes. And the help of the IMCL facility in supporting this work is gratefully acknowledged. Y. Wang, F. Cappia, and L. Capriotti acknowledge the partial finance support from the U.S. Department of Energy, Office of Nuclear Energy under DOE Idaho Operations Office Contract DEAC07-051D14517 as part of a Nuclear Science User Facilities, Rapid Turnaround Experiment Proposal (NSUF-RTE, FY-2019 1st call, #1680 and FY-2021 1st call, #4345). This work was also supported by LDRD project of 22A1059-094FP. Accordingly, the U.S. Government retains and the publisher, by accepting the article for publication, acknowledges that the U.S. Government retains a nonexclusive, paid-up, irrevocable, worldwide license to publish or reproduce the published form of this manuscript or al- low others to do so, for U.S. Government purposes. And the help of the IMCL facility in supporting this work is gratefully acknowledged.
| Funders | Funder number |
|---|---|
| U.S. Government | |
| U.S. Department of Energy | 4345, 1680, FY-2021 1st, DEAC07-051D14517 |
| Office of Nuclear Energy | |
| Laboratory Directed Research and Development | 22A1059-094FP |
Keywords
- Embrittlement
- Fuel cladding chemical interaction (FCCI)
- HT9 cladding
- Hardening
- Intermetallic
- Radiation effects