Abstract
This paper describes the design and simulation of a proof-of-concept octupole lattice at the University of Maryland Electron Ring (UMER). This experiment tests the feasibility of nonlinear integrable optics, a novel technique that is expected to mitigate resonant beam loss and enable low-loss high-intensity beam transport in rings. Integrable lattices with large amplitude-dependent tune spreads, created by nonlinear focusing elements, are proposed to damp beam response to resonant driving perturbations while maintaining large dynamic aperture. At UMER, a lattice with a single octupole insert is designed to test the predictions of this theory. The planned experiment employs a low-current high-emittance beam with low space charge tune shift (∼0.005) to probe the dynamics of a lattice with large externally-induced tune spread. Design studies show that a lattice composed of a 25-cm octupole insert and existing UMER optics can induce a tune spread of ∼0.13. Stable transport is observed in PIC simulation for many turns at space charge tune spread 0.008. A maximum spread of Δν=0.11 (rms 0.015) is observed for modest octupole strength (peak 50 T/m3). A simplified model of the system explores beam sensitivity to steering and focusing errors. Results suggest that control of orbit distortion to <0.2 mm within the insert region is essential. However, we see only weak dependence on deviations of lattice phase advance (≤0.1 rad.) from the invariant-conserving condition.
Original language | English |
---|---|
Article number | 041601 |
Journal | Physical Review Accelerators and Beams |
Volume | 22 |
Issue number | 4 |
DOIs | |
State | Published - Apr 3 2019 |
Bibliographical note
Publisher Copyright:© 2019 authors. Published by the American Physical Society. Published by the American Physical Society under the terms of the »https://creativecommons.org/licenses/by/4.0/» Creative Commons Attribution 4.0 International license. Further distribution of this work must maintain attribution to the author(s) and the published article's title, journal citation, and DOI.