Simulations of Water Flow in Relation to a Steady Criticality in an Unsaturated Alluvial Repository

Oak Ridge National Laboratory (ORNL) is examining the conditions under which a criticality event could be ruled out for large packages placed in an unsaturated alluvial repository. This work specifically examines the water level in a stylized waste package that is assumed (1) to fail on the top, and (2) to empty as water is driven away—not by boiling—but by fluid flow phenomena driven by thermal gradients. This analysis uses the PFLOTRAN code package. Specifically, this year’s work includes examination of the heat rate at which water is driven away for various percolation rates using the same assumptions listed in the 2022 annual report. The STANDARDS (formerly UNF-ST&DARDS) package has predicted dual-purpose canister (DPC) neutron multiplication factors (k-effectives) ranging above 1.1 (unitless) with failed components. The DPC designs were not created with the intent to use for disposal purposes. Emplacing such packages may be worth consideration if it can be shown that criticality is either extremely unlikely or of very low consequence to the repository’s safety case. This work aims to help establish hydrologic boundary conditions for a highly hypothetical, highly stylized subsurface criticality event. The approach to critical is assumed to be slow, producing steady heating rates under a few kilowatts. For a DPC containing capillary media, the simulated power required for dry-out was proportional to the percolation rate but was unaffected by the size of a large breech on top of the DPC. Results for single cases with no capillary media in the DPC suggest that higher infiltration rates may be required in those cases to cause flooding. Bounding mechanisms and assumptions must be identified and characterized further by performing additional perturbations to various input parameters to demonstrate robustness of the results. This might be accomplished by examining responses to power pulses to determine the system transfer function required to enable a reduced order feedback model.