Self-Potential Tomography Preconditioned by Particle Swarm Optimization—Application to Monitoring Hyporheic Exchange in a Bedrock River

A self-potential (SP) data-inversion algorithm was developed and tested on an analytical model of electrical-potential profile data attributed to single and multiple polarized electrical sources. The developed algorithm was then validated by an application to SP-monitoring field data measured on the floodplain of East Fork Poplar Creek, Oak Ridge, Tennessee, to image electrical sources in areas conducive to preferential flow into the flood plain from the bedrock-lined riverbed. The algorithm combined stochastic source-localization by particle-swarm-optimization (PSO) of electrical sources characterized by simplified geometries with source tomography by regularized weighted least-squares minimization of a quadratic objective function. Prior information was incorporated by preconditioning the tomography algorithm by PSO results. Variable percentages of random noise were added to analytical-model data to evaluate the algorithm performance. Results indicated that true parameters of single-source models were inverted and approximated with small residual error, whereas inversion of analytical-model data representing multiple electrical sources accurately approximated the locations of the sources but miscalculated some parameters because of the non-uniqueness of the inverse-model solution. Source tomography applied to analytical model data during testing produced a spatially continuous parameter field that identified the locations of point-scale synthetic dipole sources of electrical current flow with varying degrees of accuracy depending on the prior information incorporated into the tomography. When applied to SP-monitoring field data, the algorithm imaged electrical sources within a known fault that intersects the bedrock riverbed and flood plain of East Fork Poplar Creek and depicted dynamic electrical conditions attributed to hyporheic exchange.