Refining light impurity content estimates at the lower divertor based on experimental data in WEST

the WEST Team

Research output: Contribution to journalArticlepeer-review

2 Scopus citations

Abstract

WEST is an actively cooled, long-pulse tokamak with nearly all plasma-facing components (PFC) made of tungsten (W). One of the aims of WEST is to study plasma operation with W PFCs in preparation for long-pulse operation on W divertor devices like ITER (Bucalossi et al., 2014) [1]. For long-pulse operation, the W impurity content and transport to the core plasma are critical concerns that require further measurement and interpretation in order to improve plasma performance and PFC durability. In low confinement mode (L-mode) operation, the sputtering of tungsten is not expected to be driven by the plasma itself (D), but by the main light impurities (C, B, O, N) observed at trace levels in WEST. Identifying the main W sources and understanding W transport in the SOL are key metrics for plasma performance, which are simulated with Scrape-Off Layer (SOL) impurity transport codes (SOLEDGE-ERO, OEDGE-DIVIMP). Previous studies have used O as proxy for light impurity with a global content varying from 3 to 5% in SOL transport simulations (Genova et al., 2021; Rooij et al., 2020; Klepper et al., 2022) [2–4]. A power scan was performed in a standard WEST magnetic equilibrium with LH injected power up to 5 MW. Density and temperature were measured with flush-mounted Langmuir probes (Dejarnac et al., 2021) [5]. The impurity fluxes are estimated by applying the number of ionizations per photons (S/XB) coefficients calculated with the collisional-radiative model “ColRadPy” (Johnson et al., 2019) [6] to the spectral radiance measured with the WEST visible spectroscopy system (Meyer et al., 2016) [7]. This work details how the low-Z impurity content (C, O) near the divertor target was refined using the visible spectroscopy for several impurity charge states, coupled with ColRadPy to infer the content of all impurity charge states at the divertor. First results shows that the main light impurity is C and not O as originally assumed. This inferred impurity content is then used to evaluate the W sputtering at the divertor, considering the sheath at the divertor. A quantitative comparison is performed with the W flux at the divertor measured with visible spectroscopy that shows a qualitative agreement, but not fully consistent at the strike point position. This, in turn, suggests that the impurity content is not complete with O and C only.

Original languageEnglish
Article number101385
JournalNuclear Materials and Energy
Volume35
DOIs
StatePublished - Jun 2023

Funding

A. GROSJEAN reports financial support was provided by Consortium US Doe - Department of Energy. This work is supported by the U.S. DOE under Grant Number DE-SC0020414.

FundersFunder number
U.S. Department of EnergyDE-SC0020414

    Keywords

    • Divertor
    • Light impurity
    • Visible spectroscopy
    • W sources
    • WEST actively cooled tokamak

    Fingerprint

    Dive into the research topics of 'Refining light impurity content estimates at the lower divertor based on experimental data in WEST'. Together they form a unique fingerprint.

    Cite this