Abstract
In this work, mesoporous, hollow TiO2 nanofibers were fabricated by a coaxial electrospinning technique for the photocatalytic degradation of para-nitrophenol (4-NP), a well-known model water pollutant dye. The as-synthesized hollow nanofibers were sensitized by cadmium sulphide (CdS) quantum dots (QDs) through successive ion layer adsorption and reaction (SILAR) method for different deposition cycles. The CdS QDs loaded hollow TiO2 nanofibers (TiO2/CdS) harvest catalytic spots at the QDs and TiO2 interface which helps in enhanced exciton separation. The hollow and porous TiO2/CdS photocatalyst enhances absorption of UV and visible light due to presence of CdS QDs on the nanofiber surfaces. The resultant CdS QDs synthesized hollow TiO2 nanofibers exhibit excellent photocatalytic activity as shown with the degradation of 4-NP dye in aqueous medium. The photocatalytic degradation study was probed spectrophotometrically by measuring the absorbance of the degraded 4-NP solution using a UV-Vis absorption spectrophotometer. The effect of CdS QDs deposition cycles on dye degradation performance was also studied for TiO2/CdS nanofibers. TiO2/CdS photocatalyst for 3 SILAR deposition cycles was found to be ∼3 times more efficient than hollow TiO2 nanofibers and ∼8 times effective than the solid nanofibers. These nanofibers are reusable and their nanostructures do not change after repetitive usage. Such pristine and QDs sensitized hollow TiO2 nanofibers are thus a promising platform for the development of photocatalytic wastewater treatment and other applications such as photocatalytic water splitting, sensors, Li-ion batteries, and supercapacitor electrodes.
Original language | English |
---|---|
Pages (from-to) | 48109-48119 |
Number of pages | 11 |
Journal | RSC Advances |
Volume | 6 |
Issue number | 53 |
DOIs | |
State | Published - 2016 |
Externally published | Yes |
Funding
RKG acknowledges financial assistance from Department of Science and Technology (DST), India INSPIRE Faculty Award (Project No. IFA-13 ENG-57) and Indian Institute of Chemical Engineers (IIChE) (Project No. AKD/R&D/2013/15152). DST support is acknowledged to the Center for Nanosciences. Authors are thankful to Prof. P. V. Satyam of Institute of Physics, Bhubaneswar, Odisha for helping in HRTEM characterization.
Funders | Funder number |
---|---|
IIChE | D/2013/15152 |
Indian Institute of Chemical Engineers | |
Department of Science and Technology, Ministry of Science and Technology, India | IFA-13 ENG-57 |