Prototyping and Manufacturing of Magnetic Gearbox Components using Innovations in Castings

Michael Kesler; Michael Thompson; Max Neveau; Orlando Rios

doi:10.2172/2320384

Prototyping and Manufacturing of Magnetic Gearbox Components using Innovations in Castings

Michael Kesler, Michael Thompson, Max Neveau, Orlando Rios

Alloy Behavior & Design

Research output: Book/Report › Commissioned report

Abstract

In a previous collaboration with Emrgy (CRADA agreement NFE-17-06532), a housing component of Emrgy’s 10 kW gearbox was casted out of aluminum alloys using impression molds prepared using 3D printed techniques. (Henderson, 2018). After comparison with Emrgy’s existing hardware and material testing, the 3D printed impression molds were verified to represent a valid approach to advance technology readiness and commercialize Emrgy’s technology.

Original language	English
Place of Publication	United States
DOIs	https://doi.org/10.2172/2320384
State	Published - 2024

Keywords

42 ENGINEERING
13 HYDRO ENERGY

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

Access to Document

10.2172/2320384

Cite this

@book{9f9fa1f3f9d2469aa2241aa7bdec331b,

title = "Prototyping and Manufacturing of Magnetic Gearbox Components using Innovations in Castings",

abstract = "In a previous collaboration with Emrgy (CRADA agreement NFE-17-06532), a housing component of Emrgy{\textquoteright}s 10 kW gearbox was casted out of aluminum alloys using impression molds prepared using 3D printed techniques. (Henderson, 2018). After comparison with Emrgy{\textquoteright}s existing hardware and material testing, the 3D printed impression molds were verified to represent a valid approach to advance technology readiness and commercialize Emrgy{\textquoteright}s technology.",

keywords = "42 ENGINEERING, 13 HYDRO ENERGY",

author = "Michael Kesler and Michael Thompson and Max Neveau and Orlando Rios",

year = "2024",

doi = "10.2172/2320384",

language = "English",

}

TY - BOOK

T1 - Prototyping and Manufacturing of Magnetic Gearbox Components using Innovations in Castings

AU - Kesler, Michael

AU - Thompson, Michael

AU - Neveau, Max

AU - Rios, Orlando

PY - 2024

Y1 - 2024

N2 - In a previous collaboration with Emrgy (CRADA agreement NFE-17-06532), a housing component of Emrgy’s 10 kW gearbox was casted out of aluminum alloys using impression molds prepared using 3D printed techniques. (Henderson, 2018). After comparison with Emrgy’s existing hardware and material testing, the 3D printed impression molds were verified to represent a valid approach to advance technology readiness and commercialize Emrgy’s technology.

AB - In a previous collaboration with Emrgy (CRADA agreement NFE-17-06532), a housing component of Emrgy’s 10 kW gearbox was casted out of aluminum alloys using impression molds prepared using 3D printed techniques. (Henderson, 2018). After comparison with Emrgy’s existing hardware and material testing, the 3D printed impression molds were verified to represent a valid approach to advance technology readiness and commercialize Emrgy’s technology.

KW - 42 ENGINEERING

KW - 13 HYDRO ENERGY

U2 - 10.2172/2320384

DO - 10.2172/2320384

M3 - Commissioned report

BT - Prototyping and Manufacturing of Magnetic Gearbox Components using Innovations in Castings

CY - United States

ER -

Prototyping and Manufacturing of Magnetic Gearbox Components using Innovations in Castings

Abstract

Keywords

UN SDGs

Access to Document

Fingerprint

Cite this