Processing and 3D printing of SiCN polymer-derived ceramics

Mohammadreza Mahmoudi; Sungjin Kim; Arif M. Arifuzzaman; Tomonori Saito; Corson L. Cramer; Majid Minary-Jolandan

doi:10.1111/ijac.13927

Processing and 3D printing of SiCN polymer-derived ceramics

Mohammadreza Mahmoudi, Sungjin Kim, Arif M. Arifuzzaman, Tomonori Saito, Corson L. Cramer, Majid Minary-Jolandan

Research output: Contribution to journal › Article › peer-review

13 Scopus citations

Abstract

Preceramic polymer resins are attractive for the 3D printing of net-shaped ceramic components. Recently various processes have been demonstrated for 3D printing of polymer-derived ceramics (PDCs). Ultimately in these processes, the process outcomes strongly depend on the process parameters. In particular, for PDCs the ceramic density, and ceramic yield are affected by the catalyst concentration and cross-linking duration. Here, we use thermal analysis and FTIR to quantify the interrelation of the process parameters on the process outcome for polysilazanes and demonstrate 3D printing of PDC components based on the best-identified process parameters. The results of this work can be used as guidelines for future additive manufacturing of PDCs.

Original language	English
Pages (from-to)	939-948
Number of pages	10
Journal	International Journal of Applied Ceramic Technology
Volume	19
Issue number	2
DOIs	https://doi.org/10.1111/ijac.13927
State	Published - Mar 1 2022

Funding

This work is partially supported by the Eugene McDermott Professorships at UT Dallas, the National Science Foundation (CMMI, Award #1930621), the US Air Force of Scientific Research (grant # FA9550‐20‐1‐0280), and by the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, Office of Advanced Manufacturing, under (contract number DE‐AC05‐00OR22725).

Access to Document

10.1111/ijac.13927

Cite this

@article{e8b3de88581744f9886af8ca223fdb98,

title = "Processing and 3D printing of SiCN polymer-derived ceramics",

abstract = "Preceramic polymer resins are attractive for the 3D printing of net-shaped ceramic components. Recently various processes have been demonstrated for 3D printing of polymer-derived ceramics (PDCs). Ultimately in these processes, the process outcomes strongly depend on the process parameters. In particular, for PDCs the ceramic density, and ceramic yield are affected by the catalyst concentration and cross-linking duration. Here, we use thermal analysis and FTIR to quantify the interrelation of the process parameters on the process outcome for polysilazanes and demonstrate 3D printing of PDC components based on the best-identified process parameters. The results of this work can be used as guidelines for future additive manufacturing of PDCs.",

author = "Mohammadreza Mahmoudi and Sungjin Kim and Arifuzzaman, {Arif M.} and Tomonori Saito and Cramer, {Corson L.} and Majid Minary-Jolandan",

note = "Publisher Copyright: {\textcopyright} 2021 The American Ceramic Society",

year = "2022",

month = mar,

day = "1",

doi = "10.1111/ijac.13927",

language = "English",

volume = "19",

pages = "939--948",

journal = "International Journal of Applied Ceramic Technology",

issn = "1546-542X",

publisher = "wiley",

number = "2",

}

TY - JOUR

T1 - Processing and 3D printing of SiCN polymer-derived ceramics

AU - Mahmoudi, Mohammadreza

AU - Kim, Sungjin

AU - Arifuzzaman, Arif M.

AU - Saito, Tomonori

AU - Cramer, Corson L.

AU - Minary-Jolandan, Majid

PY - 2022/3/1

Y1 - 2022/3/1

N2 - Preceramic polymer resins are attractive for the 3D printing of net-shaped ceramic components. Recently various processes have been demonstrated for 3D printing of polymer-derived ceramics (PDCs). Ultimately in these processes, the process outcomes strongly depend on the process parameters. In particular, for PDCs the ceramic density, and ceramic yield are affected by the catalyst concentration and cross-linking duration. Here, we use thermal analysis and FTIR to quantify the interrelation of the process parameters on the process outcome for polysilazanes and demonstrate 3D printing of PDC components based on the best-identified process parameters. The results of this work can be used as guidelines for future additive manufacturing of PDCs.

AB - Preceramic polymer resins are attractive for the 3D printing of net-shaped ceramic components. Recently various processes have been demonstrated for 3D printing of polymer-derived ceramics (PDCs). Ultimately in these processes, the process outcomes strongly depend on the process parameters. In particular, for PDCs the ceramic density, and ceramic yield are affected by the catalyst concentration and cross-linking duration. Here, we use thermal analysis and FTIR to quantify the interrelation of the process parameters on the process outcome for polysilazanes and demonstrate 3D printing of PDC components based on the best-identified process parameters. The results of this work can be used as guidelines for future additive manufacturing of PDCs.

UR - http://www.scopus.com/inward/record.url?scp=85117127934&partnerID=8YFLogxK

U2 - 10.1111/ijac.13927

DO - 10.1111/ijac.13927

M3 - Article

AN - SCOPUS:85117127934

SN - 1546-542X

VL - 19

SP - 939

EP - 948

JO - International Journal of Applied Ceramic Technology

JF - International Journal of Applied Ceramic Technology

IS - 2

ER -

Processing and 3D printing of SiCN polymer-derived ceramics

Abstract

Funding

Access to Document

Other files and links

Fingerprint

Cite this