Premixed ignition behavior of alternative diesel fuel-relevant compounds in a motored engine experiment

James P. Szybist, André L. Boehman, Daniel C. Haworth, Hibiki Koga

Research output: Contribution to journalArticlepeer-review

153 Scopus citations

Abstract

A motored engine study using premixed charges of fuel and air at a wide range of diesel-relevant equivalence ratios was performed to investigate autoignition differences among surrogates for conventional diesel fuel, gas-to-liquid (GTL) diesel fuel, and biodiesel, as well as, n-heptane. Experiments were performed by delivering a premixed charge of vaporized fuel and air and increasing the compression ratio in a stepwise manner to increase the extent of reaction while monitoring the exhaust composition via Fourier transform infrared (FTIR) spectrometry and collecting condensable exhaust gas for subsequent gas chromatography/mass spectrometry (GC/MS) analysis. Each fuel demonstrated a two-stage ignition process, with a low-temperature heat release (LTHR) event followed by the main combustion, or high-temperature heat release (HTHR). Among the three diesel-relevant fuels, the magnitude of LTHR was highest for GTL diesel, followed by methyl decanoate, and conventional diesel fuel last. FTIR analysis of the exhaust for n-heptane, the conventional diesel surrogate, and the GTL diesel surrogate revealed that LTHR produces high concentrations of aldehydes and CO while producing only negligible amounts of CO2. Methyl decanoate differed from the other two-stage ignition fuels only in that there were significant amounts of CO2 produced during LTHR; this was the result of decarboxylation of the ester group, not the result of oxidation. GC/MS analysis of LTHR exhaust condensate for n-heptane revealed high concentrations of 2,5-heptanedione, a di-ketone that can be closely tied to species in existing autoignition models for n-heptane. GC/MS analysis of the LTHR condensate for conventional diesel fuel and GTL diesel fuel revealed a series of high molecular weight aldehydes and ketones, which were expected, as well as a series of organic acids, which are not commonly reported as products of combustion. The GC/MS analysis of the methyl decanoate exhaust condensate revealed that the aliphatic chain acts similarly to n-paraffins during LTHR, while the ester group remains intact. Thus, although the FTIR data revealed that decarboxylation occurs at significant levels for methyl decanoate, it was concluded that this occurs after the aliphatic chain has been largely consumed by other LTHR reactions.

Original languageEnglish
Pages (from-to)112-128
Number of pages17
JournalCombustion and Flame
Volume149
Issue number1-2
DOIs
StatePublished - Apr 2007
Externally publishedYes

Funding

This work was performed with the support of the Department of Energy under Grant DE-FC26-03NT41828 and under Cooperative Agreement No. DE-FC26-01NT41098. The authors wish to thank Etop Esen, Kirk Miller, Doug Smith, Keith Lawson, Ed Casey, Rafael Espinoza, and Jim Rockwell of ConocoPhillips for their support of this work. In addition, the authors wish to thank Honda Motor Corporation for their support of this work.

FundersFunder number
U.S. Department of EnergyDE-FC26-01NT41098, DE-FC26-03NT41828

    Keywords

    • Biodiesel
    • Combustion
    • Diesel
    • Fischer-Tropsch
    • HTHR
    • Heptane
    • Ignition
    • LTHR

    Fingerprint

    Dive into the research topics of 'Premixed ignition behavior of alternative diesel fuel-relevant compounds in a motored engine experiment'. Together they form a unique fingerprint.

    Cite this