Abstract
Tungsten is the material of choice as the plasma-facing material in future plasma-burning fusion reactors. During operation, plasma-facing materials will be simultaneously exposed to 14-MeV neutrons, low-energy D/He particles, and high heat loads. Neutron irradiation of tungsten results in bulk material damage, including knock-on damage causing loops and voids, and transmutation reactions leading to the transmutation of tungsten to rhenium and osmium. Under irradiation to high dose, Re and Os atoms can amalgamate into precipitates that drastically alter the material properties, noticeably increasing the hardness. However, the early-stage development of Re and Os precipitates under a fast neutron spectrum has not been investigated. In this work, the microstructure and hardening behavior of W-Re alloys containing 0 to 2.2 wt% Re, TiC-doped W, and powder-injection-molded W are investigated prior to neutron irradiation at 500ºC and 800ºC to ~0.1 displacement per atom in the High Flux Isotope Reactor (HFIR) to establish a baseline understanding of the starting microstructures. Transmission electron microscopy analysis indicates a dislocation-heavy microstructure, and scanning transmission electron microscopy–energy dispersive spectroscopy shows no spatial segregation of Re and W. Similarly, surface compositional studies performed with electron backscatter diffraction and X-ray photoelectron spectroscopy showed no presence of Re, indicating the Re did not segregate or form new phases during fabrication. The alloys in their as-fabricated state showed no Re segregation or second-phase development, with no significant differences between their microstructures and Vickers hardness values.
Original language | English |
---|---|
Pages (from-to) | 533-541 |
Number of pages | 9 |
Journal | Fusion Science and Technology |
Volume | 75 |
Issue number | 6 |
DOIs | |
State | Published - Aug 18 2019 |
Funding
We would like to thank Kun Wang, Michael McAlister, and Emily Proehl for help with microscopy and mechanical testing. This research was supported by the U.S. Department of Energy (DOE), Office of Fusion Energy Sciences. This paper has been authored by UT-Battelle, LLC, under contract number DE-AC05-00OR22725 with the DOE, as well as by DOE contract number DE-SC0014267. The work was performed as a part of the U.S.-Japan PHENIX Cooperation Project on Technological Assessment of Plasma Facing Components for DEMO Reactors, supported by the DOE, Office of Science, Fusion Energy Sciences, and the Japan Ministry of Education, Culture, Sports, Science and Technology. This research used resources at the HFIR, a DOE Office of Science User Facility operated by ORNL.
Keywords
- Tungsten-rhenium alloys
- microstructure analysis
- neutron irradiation