Abstract
The heat sink with vapor chamber heat spreader has been the emerging design as it offers tremendous reduction in spreading resistance. However, this type of heat sinks suffer from the fin side temperature non-homogeneity, which hinders the heat transfer enhancement. The present study aimed to develop parallelogram fins integrated with heat pipes to increase the heat transfer performance of the heat sink with the vapor chamber heat spreader. The experimental and numerical investigations were performed on different heat sinks with different heat spreaders, including flat plate, vapor chamber, and vapor chamber combined with heat pipe. The air-cooled heat sink features a parallelogram fin configuration is proposed to tailor the temperature non-uniformity alongside the fins. The results showed that the overall thermal resistance of the heat sink with the vapor chamber and the vapor chamber combined with heat pipe spreader (no-cut fins) is about 50% and 55% lower than in the flat plate case. The proposed heat sink with vapor chamber combined with heat pipe spreader having a parallelogram fin structure offered about 61% reduction in thermal resistance and 45–50 °C reduction in chip temperature over the heat sink with flat plate heat spreader.
Original language | English |
---|---|
Article number | 118932 |
Journal | Applied Thermal Engineering |
Volume | 215 |
DOIs | |
State | Published - Oct 2022 |
Externally published | Yes |
Funding
The authors acknowledge financial support from Lanner Electronics Inc., Taiwan. Partial support from the Ministry of Science and Technology, Taiwan, is also acknowledged under contract 108-2221-E-009-058-MY3.
Funders | Funder number |
---|---|
Lanner Electronics Inc. | |
Ministry of Science and Technology, Taiwan | 108-2221-E-009-058-MY3 |
Keywords
- Fins
- Heat sink
- Heat spreader
- Heat transfer enhancement
- Thermal resistance