Microchemistry and microstructure of proton-irradiated austenitic alloys: toward an understanding of irradiation effects in LWR core components

G. S. Was; T. R. Allen; J. T. Busby; J. Gan; D. Damcott; D. Carter; M. Atzmon; E. A. Kenik

doi:10.1016/S0022-3115(98)00897-6

Microchemistry and microstructure of proton-irradiated austenitic alloys: toward an understanding of irradiation effects in LWR core components

G. S. Was, T. R. Allen, J. T. Busby, J. Gan, D. Damcott, D. Carter, M. Atzmon, E. A. Kenik

Research output: Contribution to journal › Article › peer-review

65 Scopus citations

Abstract

Over 1200 measurements of grain boundary composition and microstructure have been made on 14 different austenitic Fe-Cr-Ni alloys following proton irradiation in the temperature range 200-600°C and in the dose range 0.1-3.0 dpa. From these data, a greater understanding of radiation induced segregation (RIS) and microstructure development has been gained. Grain boundary composition measurements revealed that Cr depletes at grain boundaries, Ni enriches and Fe can either enrich or deplete depending on alloy composition. Analysis of temperature and composition dependence of RIS revealed that the magnitude and direction of grain boundary segregation depends on alloy composition because the values of migration enthalpy of the alloy constituents are not the same, and diffusivities of the alloy constituents are composition-dependent. The dose dependence of segregation revealed ordering in Ni-base alloys and temperature dependence was used to show that RIS is consistent with a vacancy exchange mechanism. The dependence of segregation on composition is consistent with all known, relevant neutron data. RIS was found to be related to the development of the dislocation and void microstructures. Alloys in which the microstructure develops slower with dose also show slower changes in RIS. Similarly, it was shown that the dependence of swelling on composition is the same for neutron, ion and proton irradiation and all can be explained by the effect of RIS on defect diffusivity at the void nuclei. This paper illustrates the value of conducting carefully chosen irradiation experiments over several, well-controlled variables to elucidate the mechanisms underlying the microchemical and microstructural changes.

Original language	English
Pages (from-to)	96-114
Number of pages	19
Journal	Journal of Nuclear Materials
Volume	270
Issue number	1
DOIs	https://doi.org/10.1016/S0022-3115(98)00897-6
State	Published - Apr 1 1999
Externally published	Yes

Funding

The authors gratefully acknowledge S. Bruemmer, P. Andresen, L. Rehn, J. Cookson and L. Nelson for their many insightful comments and assistance. The authors also acknowledge the facilities provided by the Michigan Ion Beam Laboratory for Surface Modification and Analysis, and the Electron Microbeam Analysis Laboratory. This project was supported by the Department of Energy under grants DE-FG02-89ER-7552 and DE-FG02-93ER12130, and by Pacific Northwest National Laboratory. Research was sponsored by US Department of Energy, Division of Materials Sciences under contrat DE-AC05-96OR22464 with Lockheed Martin Energy Research Corp., through the ShaRE User Program under contract DE-AC05-76OR00033 the Oak Ridge Associated Universities.

Funders	Funder number
Division of Materials Sciences	DE-AC05-76OR00033, DE-AC05-96OR22464
U.S. Department of Energy	DE-FG02-89ER-7552, DE-FG02-93ER12130
Oak Ridge Associated Universities
Pacific Northwest National Laboratory

Access to Document

10.1016/S0022-3115(98)00897-6

Cite this

@article{b64e8455186d4df79b9c77d458dd438e,

title = "Microchemistry and microstructure of proton-irradiated austenitic alloys: toward an understanding of irradiation effects in LWR core components",

abstract = "Over 1200 measurements of grain boundary composition and microstructure have been made on 14 different austenitic Fe-Cr-Ni alloys following proton irradiation in the temperature range 200-600°C and in the dose range 0.1-3.0 dpa. From these data, a greater understanding of radiation induced segregation (RIS) and microstructure development has been gained. Grain boundary composition measurements revealed that Cr depletes at grain boundaries, Ni enriches and Fe can either enrich or deplete depending on alloy composition. Analysis of temperature and composition dependence of RIS revealed that the magnitude and direction of grain boundary segregation depends on alloy composition because the values of migration enthalpy of the alloy constituents are not the same, and diffusivities of the alloy constituents are composition-dependent. The dose dependence of segregation revealed ordering in Ni-base alloys and temperature dependence was used to show that RIS is consistent with a vacancy exchange mechanism. The dependence of segregation on composition is consistent with all known, relevant neutron data. RIS was found to be related to the development of the dislocation and void microstructures. Alloys in which the microstructure develops slower with dose also show slower changes in RIS. Similarly, it was shown that the dependence of swelling on composition is the same for neutron, ion and proton irradiation and all can be explained by the effect of RIS on defect diffusivity at the void nuclei. This paper illustrates the value of conducting carefully chosen irradiation experiments over several, well-controlled variables to elucidate the mechanisms underlying the microchemical and microstructural changes.",

author = "Was, {G. S.} and Allen, {T. R.} and Busby, {J. T.} and J. Gan and D. Damcott and D. Carter and M. Atzmon and Kenik, {E. A.}",

year = "1999",

month = apr,

day = "1",

doi = "10.1016/S0022-3115(98)00897-6",

language = "English",

volume = "270",

pages = "96--114",

journal = "Journal of Nuclear Materials",

issn = "0022-3115",

publisher = "Elsevier",

number = "1",

}

TY - JOUR

T1 - Microchemistry and microstructure of proton-irradiated austenitic alloys

T2 - toward an understanding of irradiation effects in LWR core components

AU - Was, G. S.

AU - Allen, T. R.

AU - Busby, J. T.

AU - Gan, J.

AU - Damcott, D.

AU - Carter, D.

AU - Atzmon, M.

AU - Kenik, E. A.

PY - 1999/4/1

Y1 - 1999/4/1

N2 - Over 1200 measurements of grain boundary composition and microstructure have been made on 14 different austenitic Fe-Cr-Ni alloys following proton irradiation in the temperature range 200-600°C and in the dose range 0.1-3.0 dpa. From these data, a greater understanding of radiation induced segregation (RIS) and microstructure development has been gained. Grain boundary composition measurements revealed that Cr depletes at grain boundaries, Ni enriches and Fe can either enrich or deplete depending on alloy composition. Analysis of temperature and composition dependence of RIS revealed that the magnitude and direction of grain boundary segregation depends on alloy composition because the values of migration enthalpy of the alloy constituents are not the same, and diffusivities of the alloy constituents are composition-dependent. The dose dependence of segregation revealed ordering in Ni-base alloys and temperature dependence was used to show that RIS is consistent with a vacancy exchange mechanism. The dependence of segregation on composition is consistent with all known, relevant neutron data. RIS was found to be related to the development of the dislocation and void microstructures. Alloys in which the microstructure develops slower with dose also show slower changes in RIS. Similarly, it was shown that the dependence of swelling on composition is the same for neutron, ion and proton irradiation and all can be explained by the effect of RIS on defect diffusivity at the void nuclei. This paper illustrates the value of conducting carefully chosen irradiation experiments over several, well-controlled variables to elucidate the mechanisms underlying the microchemical and microstructural changes.

AB - Over 1200 measurements of grain boundary composition and microstructure have been made on 14 different austenitic Fe-Cr-Ni alloys following proton irradiation in the temperature range 200-600°C and in the dose range 0.1-3.0 dpa. From these data, a greater understanding of radiation induced segregation (RIS) and microstructure development has been gained. Grain boundary composition measurements revealed that Cr depletes at grain boundaries, Ni enriches and Fe can either enrich or deplete depending on alloy composition. Analysis of temperature and composition dependence of RIS revealed that the magnitude and direction of grain boundary segregation depends on alloy composition because the values of migration enthalpy of the alloy constituents are not the same, and diffusivities of the alloy constituents are composition-dependent. The dose dependence of segregation revealed ordering in Ni-base alloys and temperature dependence was used to show that RIS is consistent with a vacancy exchange mechanism. The dependence of segregation on composition is consistent with all known, relevant neutron data. RIS was found to be related to the development of the dislocation and void microstructures. Alloys in which the microstructure develops slower with dose also show slower changes in RIS. Similarly, it was shown that the dependence of swelling on composition is the same for neutron, ion and proton irradiation and all can be explained by the effect of RIS on defect diffusivity at the void nuclei. This paper illustrates the value of conducting carefully chosen irradiation experiments over several, well-controlled variables to elucidate the mechanisms underlying the microchemical and microstructural changes.

UR - http://www.scopus.com/inward/record.url?scp=0032653806&partnerID=8YFLogxK

U2 - 10.1016/S0022-3115(98)00897-6

DO - 10.1016/S0022-3115(98)00897-6

M3 - Article

AN - SCOPUS:0032653806

SN - 0022-3115

VL - 270

SP - 96

EP - 114

JO - Journal of Nuclear Materials

JF - Journal of Nuclear Materials

IS - 1

ER -

Microchemistry and microstructure of proton-irradiated austenitic alloys: toward an understanding of irradiation effects in LWR core components

Abstract

Funding

Access to Document

Other files and links

Fingerprint

Cite this