Mechanical, thermal, morphological, and rheological characteristics of high performance 3D-printing lignin-based composites for additive manufacturing applications

Ngoc A. Nguyen; Christopher C. Bowland; Amit K. Naskar

doi:10.1016/j.dib.2018.05.130

Mechanical, thermal, morphological, and rheological characteristics of high performance 3D-printing lignin-based composites for additive manufacturing applications

Ngoc A. Nguyen, Christopher C. Bowland, Amit K. Naskar

Carbon and Composites

Research output: Contribution to journal › Article › peer-review

27 Scopus citations

Abstract

The article presents different mechanical, thermal and rheological data corresponding to the morphological formation within various renewable lignin-based composites containing acrylonitrile butadiene styrene (ABS), acrylonitrile butadiene rubber (NBR41, 41 mol% nitrile content), and carbon fibers (CFs). The data of 3D-printing properties and morphology of 3D-printed layers of selected lignin-based composites are revealed. This data is related to our recent research article entitled “A general method to improve 3D-printability and inter-layer adhesion in lignin-based composites” (Nguyen et al., 2018 [1]).

Original language	English
Pages (from-to)	936-950
Number of pages	15
Journal	Data in Brief
Volume	19
DOIs	https://doi.org/10.1016/j.dib.2018.05.130
State	Published - Aug 2018

Funding

This research at Oak Ridge National Laboratory, managed by UT Battelle, LLC, for the U.S. Department of Energy (DOE) under contract DE-AC05-00OR22725 , was sponsored by the Office of Energy Efficiency and Renewable Energy BioEnergy Technologies Office Program. C. C. B. acknowledges support from Wigner Fellowship Program as part of the Laboratory Directed Research and Development Program of Oak Ridge National Laboratory, managed by UT-Battelle, LLC, for the U. S. Department of Energy.

Access to Document

10.1016/j.dib.2018.05.130

Cite this

@article{d7d69b0c245548fda4c9728bab32d83c,

title = "Mechanical, thermal, morphological, and rheological characteristics of high performance 3D-printing lignin-based composites for additive manufacturing applications",

abstract = "The article presents different mechanical, thermal and rheological data corresponding to the morphological formation within various renewable lignin-based composites containing acrylonitrile butadiene styrene (ABS), acrylonitrile butadiene rubber (NBR41, 41 mol% nitrile content), and carbon fibers (CFs). The data of 3D-printing properties and morphology of 3D-printed layers of selected lignin-based composites are revealed. This data is related to our recent research article entitled “A general method to improve 3D-printability and inter-layer adhesion in lignin-based composites” (Nguyen et al., 2018 [1]).",

author = "Nguyen, {Ngoc A.} and Bowland, {Christopher C.} and Naskar, {Amit K.}",

note = "Publisher Copyright: {\textcopyright} 2018 The Authors",

year = "2018",

month = aug,

doi = "10.1016/j.dib.2018.05.130",

language = "English",

volume = "19",

pages = "936--950",

journal = "Data in Brief",

issn = "2352-3409",

publisher = "Elsevier",

}

TY - JOUR

T1 - Mechanical, thermal, morphological, and rheological characteristics of high performance 3D-printing lignin-based composites for additive manufacturing applications

AU - Nguyen, Ngoc A.

AU - Bowland, Christopher C.

AU - Naskar, Amit K.

PY - 2018/8

Y1 - 2018/8

N2 - The article presents different mechanical, thermal and rheological data corresponding to the morphological formation within various renewable lignin-based composites containing acrylonitrile butadiene styrene (ABS), acrylonitrile butadiene rubber (NBR41, 41 mol% nitrile content), and carbon fibers (CFs). The data of 3D-printing properties and morphology of 3D-printed layers of selected lignin-based composites are revealed. This data is related to our recent research article entitled “A general method to improve 3D-printability and inter-layer adhesion in lignin-based composites” (Nguyen et al., 2018 [1]).

AB - The article presents different mechanical, thermal and rheological data corresponding to the morphological formation within various renewable lignin-based composites containing acrylonitrile butadiene styrene (ABS), acrylonitrile butadiene rubber (NBR41, 41 mol% nitrile content), and carbon fibers (CFs). The data of 3D-printing properties and morphology of 3D-printed layers of selected lignin-based composites are revealed. This data is related to our recent research article entitled “A general method to improve 3D-printability and inter-layer adhesion in lignin-based composites” (Nguyen et al., 2018 [1]).

UR - http://www.scopus.com/inward/record.url?scp=85046723741&partnerID=8YFLogxK

U2 - 10.1016/j.dib.2018.05.130

DO - 10.1016/j.dib.2018.05.130

M3 - Article

AN - SCOPUS:85046723741

SN - 2352-3409

VL - 19

SP - 936

EP - 950

JO - Data in Brief

JF - Data in Brief

ER -

Mechanical, thermal, morphological, and rheological characteristics of high performance 3D-printing lignin-based composites for additive manufacturing applications

Abstract

Funding

Access to Document

Other files and links

Fingerprint

Cite this