Mechanical properties and fracture behavior of interfacial alumina scales on plasma-sprayed thermal barrier coatings

J. A. Haynes, M. K. Ferber, W. D. Porter, E. D. Rigney

Research output: Contribution to journalArticlepeer-review

30 Scopus citations

Abstract

The mechanical properties and fracture behavior of Y-doped Al2O3 scales were investigated by furnace thermal cycling (to 1,150°C) of plasma-sprayed thermal barrier coatings (TBCs) with vacuum plasma-sprayed (VPS) or air plasma-sprayed (APS) Ni-22Cr-10Al-1Y bond coatings. No significant alterations in Al2O3 hardness or Young's modulus (as measured by mechanical properties microprobe) were detected as a function of bond coat type, exposure time, or number of thermal cycles. The interfacial Al2O3 scales on VPS NiCrAlY exhibited progressive increases in localized fracture, buckling, and delamination during thermal cycling. The concentration of arrayed lenticular voids in the columnar Al2O3 grain boundaries significantly increased during cyclic oxidation (as compared to isothermal oxidation), but only in scales which formed on convex surfaces, suggesting internal void growth was stress-related. The amount and frequency of scale damage was higher on convex surfaces with a relatively large radius of curvature as compared to convex surfaces with a very small radius of curvature. Although the thermo-mechanical fracture resistance of Al2O3 scales on APS NiCrAlY was superior to scales on VPS NiCrAlY, TBC lifetimes on VPS NiCrAlY were greater by a factor of 2. Apparently, severe interfacial scale damage did not rapidly degrade the adherence of the ceramic top coatings.

Original languageEnglish
Pages (from-to)49-69
Number of pages21
JournalMaterials at High Temperatures
Volume16
Issue number2
DOIs
StatePublished - 1999
Externally publishedYes

Fingerprint

Dive into the research topics of 'Mechanical properties and fracture behavior of interfacial alumina scales on plasma-sprayed thermal barrier coatings'. Together they form a unique fingerprint.

Cite this