Magneto-structural and induction heating properties of MFe2O4 (M = Co, Mn, Zn) MNPs for magnetic particle hyperthermia application

Anil Salokhe; Amruta Koli; Vidhya Jadhav; Shubhangi Mane-Gavade; Amit Supale; Rohant Dhabbe; Xiao Ying Yu; Sandip Sabale

doi:10.1007/s42452-020-03865-x

Magneto-structural and induction heating properties of MFe₂O₄ (M = Co, Mn, Zn) MNPs for magnetic particle hyperthermia application

Anil Salokhe, Amruta Koli, Vidhya Jadhav, Shubhangi Mane-Gavade, Amit Supale, Rohant Dhabbe, Xiao Ying Yu, Sandip Sabale

Advanced Nuclear Materials

Research output: Contribution to journal › Article › peer-review

22 Scopus citations

Abstract

The complex decomposition approach was used for the synthesis of MFe₂O₄ magnetic nanoparticles (MNPs) by substituting M as Co, Mn, and Zn. The obtained MNPs were characterized for magneto-structural properties using X-Ray diffraction patterns, FTIR, Raman and Mossbauer spectroscopy techniques which validate the synthesis of phase pure cubic spinel ferrite (space group Fd3m) with five Raman active modes. Magnetic properties confirmed using Mossbauer spectroscopy. The size, morphology, and compositional analysis was performed using HRTEM and EDX where the size of MNPs was found to be less than 10 nm that attains superparamagnetism with 39.0, 58.28, and 44.24 emu gm⁻¹ moment for CoFe₂O₄, MnFe₂O₄, and ZnFe₂O₄, respectively. The magnetic hyperthermia performance of obtained MNPs was evaluated by induction heating experiments at magnetic field range 13.3–26.7 kAm⁻¹. The specific absorption rate (SAR) and intrinsic loss power (ILP) values were determined at different magnetic fields and mutually related with magneto-structural properties to evaluate its potential for magnetic particle hyperthermia therapy. The CoFe₂O₄ MNP exhibits a maximum temperature rise of 25 and 35 °C for 5 and 10 mgmL⁻¹ concentrations with threshold temperature rise.

Original language	English
Article number	2017
Journal	SN Applied Sciences
Volume	2
Issue number	12
DOIs	https://doi.org/10.1007/s42452-020-03865-x
State	Published - Dec 2020

Funding

Authors are grateful to the Department of Science & Technology, New Delhi, for the grants under DST-FIST program (No. SR/FST/college-151/2013 (C)) to Jaysingpur College, Jaysingpur. Authors are also thankful to the Indian Institute of Geomagnetism (IIGM), Panvel for characterization using AGM for magnetism as well as UGC-DAE Consortium for Scientific Research, Indore Centre for characterization using Raman and Mossbauer spectroscopy. Dr. X.-Y. Yu thanks for the support of the Pacific Northwest National Laboratory (PNNL). PNNL is operated for the U.S. Department of Energy by Battelle Memorial Institute under Contract No. DE-AC05-76RL01830. Authors are grateful to the Department of Science & Technology, New Delhi, for the grants under DST-FIST program (No. SR/FST/college-151/2013 (C)) to Jaysingpur College, Jaysingpur. Authors are also thankful to the Indian Institute of Geomagnetism (IIGM), Panvel for characterization using AGM for magnetism as well as UGC-DAE Consortium for Scientific Research, Indore Centre for characterization using Raman and Mossbauer spectroscopy. Dr. X.-Y. Yu thanks for the support of the Pacific Northwest National Laboratory (PNNL). PNNL is operated for the U.S. Department of Energy by Battelle Memorial Institute under Contract No. DE-AC05-76RL01830.

Keywords

Complex decomposition
Magnetic fluid hyperthermia (MFH)
Magnetic nanoparticles
Magneto-structural properties
Saturation magnetization

Access to Document

10.1007/s42452-020-03865-x

Cite this

@article{3cfd602360564a078f73680128515106,

title = "Magneto-structural and induction heating properties of MFe2O4 (M = Co, Mn, Zn) MNPs for magnetic particle hyperthermia application",

abstract = "The complex decomposition approach was used for the synthesis of MFe2O4 magnetic nanoparticles (MNPs) by substituting M as Co, Mn, and Zn. The obtained MNPs were characterized for magneto-structural properties using X-Ray diffraction patterns, FTIR, Raman and Mossbauer spectroscopy techniques which validate the synthesis of phase pure cubic spinel ferrite (space group Fd3m) with five Raman active modes. Magnetic properties confirmed using Mossbauer spectroscopy. The size, morphology, and compositional analysis was performed using HRTEM and EDX where the size of MNPs was found to be less than 10 nm that attains superparamagnetism with 39.0, 58.28, and 44.24 emu gm−1 moment for CoFe2O4, MnFe2O4, and ZnFe2O4, respectively. The magnetic hyperthermia performance of obtained MNPs was evaluated by induction heating experiments at magnetic field range 13.3–26.7 kAm−1. The specific absorption rate (SAR) and intrinsic loss power (ILP) values were determined at different magnetic fields and mutually related with magneto-structural properties to evaluate its potential for magnetic particle hyperthermia therapy. The CoFe2O4 MNP exhibits a maximum temperature rise of 25 and 35 °C for 5 and 10 mgmL−1 concentrations with threshold temperature rise.",

keywords = "Complex decomposition, Magnetic fluid hyperthermia (MFH), Magnetic nanoparticles, Magneto-structural properties, Saturation magnetization",

author = "Anil Salokhe and Amruta Koli and Vidhya Jadhav and Shubhangi Mane-Gavade and Amit Supale and Rohant Dhabbe and Yu, \{Xiao Ying\} and Sandip Sabale",

note = "Publisher Copyright: {\textcopyright} 2020, Springer Nature Switzerland AG.",

year = "2020",

month = dec,

doi = "10.1007/s42452-020-03865-x",

language = "English",

volume = "2",

journal = "SN Applied Sciences",

issn = "2523-3971",

publisher = "Springer",

number = "12",

}

TY - JOUR

T1 - Magneto-structural and induction heating properties of MFe2O4 (M = Co, Mn, Zn) MNPs for magnetic particle hyperthermia application

AU - Salokhe, Anil

AU - Koli, Amruta

AU - Jadhav, Vidhya

AU - Mane-Gavade, Shubhangi

AU - Supale, Amit

AU - Dhabbe, Rohant

AU - Yu, Xiao Ying

AU - Sabale, Sandip

PY - 2020/12

Y1 - 2020/12

N2 - The complex decomposition approach was used for the synthesis of MFe2O4 magnetic nanoparticles (MNPs) by substituting M as Co, Mn, and Zn. The obtained MNPs were characterized for magneto-structural properties using X-Ray diffraction patterns, FTIR, Raman and Mossbauer spectroscopy techniques which validate the synthesis of phase pure cubic spinel ferrite (space group Fd3m) with five Raman active modes. Magnetic properties confirmed using Mossbauer spectroscopy. The size, morphology, and compositional analysis was performed using HRTEM and EDX where the size of MNPs was found to be less than 10 nm that attains superparamagnetism with 39.0, 58.28, and 44.24 emu gm−1 moment for CoFe2O4, MnFe2O4, and ZnFe2O4, respectively. The magnetic hyperthermia performance of obtained MNPs was evaluated by induction heating experiments at magnetic field range 13.3–26.7 kAm−1. The specific absorption rate (SAR) and intrinsic loss power (ILP) values were determined at different magnetic fields and mutually related with magneto-structural properties to evaluate its potential for magnetic particle hyperthermia therapy. The CoFe2O4 MNP exhibits a maximum temperature rise of 25 and 35 °C for 5 and 10 mgmL−1 concentrations with threshold temperature rise.

AB - The complex decomposition approach was used for the synthesis of MFe2O4 magnetic nanoparticles (MNPs) by substituting M as Co, Mn, and Zn. The obtained MNPs were characterized for magneto-structural properties using X-Ray diffraction patterns, FTIR, Raman and Mossbauer spectroscopy techniques which validate the synthesis of phase pure cubic spinel ferrite (space group Fd3m) with five Raman active modes. Magnetic properties confirmed using Mossbauer spectroscopy. The size, morphology, and compositional analysis was performed using HRTEM and EDX where the size of MNPs was found to be less than 10 nm that attains superparamagnetism with 39.0, 58.28, and 44.24 emu gm−1 moment for CoFe2O4, MnFe2O4, and ZnFe2O4, respectively. The magnetic hyperthermia performance of obtained MNPs was evaluated by induction heating experiments at magnetic field range 13.3–26.7 kAm−1. The specific absorption rate (SAR) and intrinsic loss power (ILP) values were determined at different magnetic fields and mutually related with magneto-structural properties to evaluate its potential for magnetic particle hyperthermia therapy. The CoFe2O4 MNP exhibits a maximum temperature rise of 25 and 35 °C for 5 and 10 mgmL−1 concentrations with threshold temperature rise.

KW - Complex decomposition

KW - Magnetic fluid hyperthermia (MFH)

KW - Magnetic nanoparticles

KW - Magneto-structural properties

KW - Saturation magnetization

UR - https://www.scopus.com/pages/publications/85100686506

U2 - 10.1007/s42452-020-03865-x

DO - 10.1007/s42452-020-03865-x

M3 - Article

AN - SCOPUS:85100686506

SN - 2523-3971

VL - 2

JO - SN Applied Sciences

JF - SN Applied Sciences

IS - 12

M1 - 2017

ER -