Insulation system test for the KSTAR Central Solenoid (CS) model coil

Han Sung Kim; Sang Ho Kim; Young Hwan Kim; Yong Hwan Kim; Kie Hyung Chung; R. P. Reed; D. Evans

doi:10.1109/77.783277

Insulation system test for the KSTAR Central Solenoid (CS) model coil

Han Sung Kim, Sang Ho Kim, Young Hwan Kim, Yong Hwan Kim, Kie Hyung Chung, R. P. Reed, D. Evans

Research output: Contribution to journal › Article › peer-review

Abstract

Insulation system for to kam a k superconducting magnet should ensure the mechanical and electrical reliability and must have resistance to radiation environment during operation. Winding scheme of the whole KSTAR (Korea Superconducting Tokamak Advanced Research) CS (Central Solenoid) coil using Nb3Sn CICC (Cable In Conduit Conductor), it is found that there is considerable shear due to tensile force. To obtain proper resin system two candidates were tested and compared with the ITER (International Thermonuclear Experimental Reactor) standard resin system as a benchmark. This work includes viscosity measurement, flexural strength, shear strength and thermal contraction at room temperature and 77K. Test procedures and the results of each measurement are presented.

Original language	English
Pages (from-to)	224-227
Number of pages	4
Journal	IEEE Transactions on Applied Superconductivity
Volume	9
Issue number	2 PART 1
DOIs	https://doi.org/10.1109/77.783277
State	Published - 1999
Externally published	Yes

Funding

Manuscript received September 14, 1998. This work is supported by the Korea Ministry of Science & Technology.

Funders	Funder number
Ministerio de Ciencia y Tecnología

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

Access to Document

10.1109/77.783277

Cite this

@article{ea64c5248ab74447beeb4656079f3ade,

title = "Insulation system test for the KSTAR Central Solenoid (CS) model coil",

abstract = "Insulation system for to kam a k superconducting magnet should ensure the mechanical and electrical reliability and must have resistance to radiation environment during operation. Winding scheme of the whole KSTAR (Korea Superconducting Tokamak Advanced Research) CS (Central Solenoid) coil using Nb3Sn CICC (Cable In Conduit Conductor), it is found that there is considerable shear due to tensile force. To obtain proper resin system two candidates were tested and compared with the ITER (International Thermonuclear Experimental Reactor) standard resin system as a benchmark. This work includes viscosity measurement, flexural strength, shear strength and thermal contraction at room temperature and 77K. Test procedures and the results of each measurement are presented.",

author = "Kim, {Han Sung} and Kim, {Sang Ho} and Kim, {Young Hwan} and Kim, {Yong Hwan} and Chung, {Kie Hyung} and Reed, {R. P.} and D. Evans",

year = "1999",

doi = "10.1109/77.783277",

language = "English",

volume = "9",

pages = "224--227",

journal = "IEEE Transactions on Applied Superconductivity",

issn = "1051-8223",

publisher = "Institute of Electrical and Electronics Engineers",

number = "2 PART 1",

}

TY - JOUR

T1 - Insulation system test for the KSTAR Central Solenoid (CS) model coil

AU - Kim, Han Sung

AU - Kim, Sang Ho

AU - Kim, Young Hwan

AU - Kim, Yong Hwan

AU - Chung, Kie Hyung

AU - Reed, R. P.

AU - Evans, D.

PY - 1999

Y1 - 1999

N2 - Insulation system for to kam a k superconducting magnet should ensure the mechanical and electrical reliability and must have resistance to radiation environment during operation. Winding scheme of the whole KSTAR (Korea Superconducting Tokamak Advanced Research) CS (Central Solenoid) coil using Nb3Sn CICC (Cable In Conduit Conductor), it is found that there is considerable shear due to tensile force. To obtain proper resin system two candidates were tested and compared with the ITER (International Thermonuclear Experimental Reactor) standard resin system as a benchmark. This work includes viscosity measurement, flexural strength, shear strength and thermal contraction at room temperature and 77K. Test procedures and the results of each measurement are presented.

AB - Insulation system for to kam a k superconducting magnet should ensure the mechanical and electrical reliability and must have resistance to radiation environment during operation. Winding scheme of the whole KSTAR (Korea Superconducting Tokamak Advanced Research) CS (Central Solenoid) coil using Nb3Sn CICC (Cable In Conduit Conductor), it is found that there is considerable shear due to tensile force. To obtain proper resin system two candidates were tested and compared with the ITER (International Thermonuclear Experimental Reactor) standard resin system as a benchmark. This work includes viscosity measurement, flexural strength, shear strength and thermal contraction at room temperature and 77K. Test procedures and the results of each measurement are presented.

UR - http://www.scopus.com/inward/record.url?scp=0032655248&partnerID=8YFLogxK

U2 - 10.1109/77.783277

DO - 10.1109/77.783277

M3 - Article

AN - SCOPUS:0032655248

SN - 1051-8223

VL - 9

SP - 224

EP - 227

JO - IEEE Transactions on Applied Superconductivity

JF - IEEE Transactions on Applied Superconductivity

IS - 2 PART 1

ER -

Insulation system test for the KSTAR Central Solenoid (CS) model coil

Abstract

Funding

UN SDGs

Access to Document

Other files and links

Fingerprint

Cite this