TY - GEN
T1 - Improving computational fluid dynamics simulations for the spallation neutron source jet-flow target
AU - Barbier, C.
AU - Dominguez-Ontiveros, E.
N1 - Publisher Copyright:
© Copyright 2016 by ASME.
PY - 2016
Y1 - 2016
N2 - A liquid mercury target is used at Oak Ridge National Laboratory's (ORNL [1]) Spallation Neutron Source (SNS [2]) to generate neutrons. The mercury is flowing in a stainless steel containment vessel for neutron spallation, but also to cool the vessel itself. Computational Fluid Dynamics (CFD) simulations have been used to estimate the temperature and pressure fields needed for the thermal stress analysis. Because of the geometry complexity, the high turbulence number, and the computational time requirements, generating a quality mesh that can accurately capture the flow and heat transfer has always been a challenge. However, with today's High Performance Computing (HPC) advances, larger and larger meshes can now be used and better accuracy can be achieved. In this study, two meshing methods were used for the SNS jet-flow target: automatic tetrahedral method (ANSYS meshing) and manual hexahedral meshing (ICEM-CFD). Both methods are compared in terms of quality, size, ease of generation, convergence, and user-friendliness. Both meshes were used with ANSYS-CFX to simulate the steady, Newtonian, single phase, isothermal, incompressible and turbulent flow in the target. The Shear Stress Transport (SST) k-ω model developed by Menter [3] was used for turbulence modeling. The accuracy of the CFD simulations are tested against experimental data presented in the current paper. An in-depth series of Particle Image Velocimetry (PIV) measurements performed on a "visual jet-flow target", an acrylic replica target running with water, are presented in the paper. Since flow measurements in mercury are difficult, a water loop was built to investigate the flow in the target and a potential gas injection in the flow to mitigate the pressure wave [4]. A PIV system on a precise translation stage was setup on the water loop to perform detailed and accurate PIV measurements. Mean flow velocity fields were used to validate the CFD simulations. The paper concludes on the choice for mesh generation for future target analysis, and the path forward for CFD simulations for the future SNS targets.
AB - A liquid mercury target is used at Oak Ridge National Laboratory's (ORNL [1]) Spallation Neutron Source (SNS [2]) to generate neutrons. The mercury is flowing in a stainless steel containment vessel for neutron spallation, but also to cool the vessel itself. Computational Fluid Dynamics (CFD) simulations have been used to estimate the temperature and pressure fields needed for the thermal stress analysis. Because of the geometry complexity, the high turbulence number, and the computational time requirements, generating a quality mesh that can accurately capture the flow and heat transfer has always been a challenge. However, with today's High Performance Computing (HPC) advances, larger and larger meshes can now be used and better accuracy can be achieved. In this study, two meshing methods were used for the SNS jet-flow target: automatic tetrahedral method (ANSYS meshing) and manual hexahedral meshing (ICEM-CFD). Both methods are compared in terms of quality, size, ease of generation, convergence, and user-friendliness. Both meshes were used with ANSYS-CFX to simulate the steady, Newtonian, single phase, isothermal, incompressible and turbulent flow in the target. The Shear Stress Transport (SST) k-ω model developed by Menter [3] was used for turbulence modeling. The accuracy of the CFD simulations are tested against experimental data presented in the current paper. An in-depth series of Particle Image Velocimetry (PIV) measurements performed on a "visual jet-flow target", an acrylic replica target running with water, are presented in the paper. Since flow measurements in mercury are difficult, a water loop was built to investigate the flow in the target and a potential gas injection in the flow to mitigate the pressure wave [4]. A PIV system on a precise translation stage was setup on the water loop to perform detailed and accurate PIV measurements. Mean flow velocity fields were used to validate the CFD simulations. The paper concludes on the choice for mesh generation for future target analysis, and the path forward for CFD simulations for the future SNS targets.
UR - http://www.scopus.com/inward/record.url?scp=85022029896&partnerID=8YFLogxK
U2 - 10.1115/FEDSM2016-7671
DO - 10.1115/FEDSM2016-7671
M3 - Conference contribution
AN - SCOPUS:85022029896
T3 - American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM
BT - Symposia
PB - American Society of Mechanical Engineers (ASME)
T2 - ASME 2016 Fluids Engineering Division Summer Meeting, FEDSM 2016, collocated with the ASME 2016 Heat Transfer Summer Conference and the ASME 2016 14th International Conference on Nanochannels, Microchannels, and Minichannels
Y2 - 10 July 2016 through 14 July 2016
ER -