Impact of humidity on formaldehyde and moisture buffering capacity of porous building material

Anh Dung Tran Le, Jianshun S. Zhang, Zhenlei Liu

Research output: Contribution to journalArticlepeer-review

3 Scopus citations

Abstract

The aim of this article is to present a validated model to study the influence of humidity on formaldehyde sorption of building material and the effect of formaldehyde and moisture buffering capacity of hygroscopic porous material on indoor air environment. New empirical formulas proposed to describe the diffusion and partition coefficients as functions of humidity based on previous experimental data are incorporated in a coupled moisture and pollutants transport simulation model. The numerical model that takes into account the effect of RH (or moisture) in building materials on VOC diffusion can be used to simulate VOC emissions/sorption from building materials. The developed model is implemented in the environment SPARK (Simulation Problem Analysis and Research Kernel) using finite difference technique. The model is then applied to study the hygric and formaldehyde (FOR, a water soluble VOC) behavior of calcium silicate (CS) subjected to different dynamic conditions of RH and formaldehyde. The results obtained in this paper help to emphasize the importance of moisture and formaldehyde buffering capacity as a new key parameter when selecting clean and hygroscopic building materials in building design because they can contribute to dampen indoor RH and formaldehyde variations. In addition, the impact of RH variation is significant and needed to be taken into account in the simulation to correctly predict the indoor formaldehyde concentration. The model developed in this paper can also be used to optimize the hygric performance and IAQ in building.

Original languageEnglish
Article number102114
JournalJournal of Building Engineering
Volume36
DOIs
StatePublished - Apr 2021
Externally publishedYes

Funding

This study was carried out under the program Fulbright Scholar Program/Hauts-de-France which is supported by the Franco-American Fulbright Commission and the Hauts-de-France region, France. Thanks to this financial support, it enabled Dr. Anh Dung TRAN LE to work at the BEESL of Syracuse University, USA for a period of six months. The authors wish to thank them.The authors wish to thank the editor and reviewers for their constructive and useful comments on the previous version of this article. This study was carried out under the program Fulbright Scholar Program/Hauts-de-France which is supported by the Franco-American Fulbright Commission and the Hauts-de-France region , France. Thanks to this financial support, it enabled Dr. Anh Dung TRAN LE to work at the BEESL of Syracuse University, USA for a period of six months. The authors wish to thank them.The authors wish to thank the editor and reviewers for their constructive and useful comments on the previous version of this article.

FundersFunder number
Franco-American Fulbright Commission
Syracuse University
Région Hauts-de-France

    Keywords

    • Calcium silicate
    • Formaldehyde
    • Hygroscopic material
    • Indoor air quality (IAQ)
    • Moisture
    • Moisture buffering capacity
    • VOC
    • VOC buffering Capacity

    Fingerprint

    Dive into the research topics of 'Impact of humidity on formaldehyde and moisture buffering capacity of porous building material'. Together they form a unique fingerprint.

    Cite this