Hybrid multilevel inverter with single DC source

Haiwen Liu; Leon M. Tolbert; Burak Ozpineci; Zhong Du

doi:10.1109/MWSCAS.2008.4616855

Hybrid multilevel inverter with single DC source

Haiwen Liu, Leon M. Tolbert, Burak Ozpineci, Zhong Du

Buildings and Transportation Science Div

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

12 Scopus citations

Abstract

A hybrid multilevel inverter model based on PSIM and MATLAB/SIMULINK is presented in this paper. It consists of a standard 3-leg inverter (one leg for each phase) and H-bridge in series with each inverter leg. The inverter can be used in hybrid electric vehicles (HEV) and electric vehicles (EV). The co-simulation model is employed in order to take full advantage of different power electronics simulation software. Specifically, the main circuit model is developed using PSIM, and the control model is developed using MATLAB/SIMULINK. An experimental 5-level hybrid inverter is tested, which is controlled by multilevel carrier-based PWM signals. The simulation yields a good estimation for the test results of the inverter.

Original language	English
Title of host publication	2008 IEEE International 51st Midwest Symposium on Circuits and Systems, MWSCAS
Pages	538-541
Number of pages	4
DOIs	https://doi.org/10.1109/MWSCAS.2008.4616855
State	Published - 2008
Event	2008 IEEE International 51st Midwest Symposium on Circuits and Systems, MWSCAS - Knoxville, TN, United States Duration: Aug 10 2008 → Aug 13 2008

Publication series

Name	Midwest Symposium on Circuits and Systems
ISSN (Print)	1548-3746

Conference

Conference	2008 IEEE International 51st Midwest Symposium on Circuits and Systems, MWSCAS
Country/Territory	United States
City	Knoxville, TN
Period	08/10/08 → 08/13/08

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

Access to Document

10.1109/MWSCAS.2008.4616855

Cite this

@inproceedings{d2585a73aa424a36b7cbed2a4a619542,

title = "Hybrid multilevel inverter with single DC source",

abstract = "A hybrid multilevel inverter model based on PSIM and MATLAB/SIMULINK is presented in this paper. It consists of a standard 3-leg inverter (one leg for each phase) and H-bridge in series with each inverter leg. The inverter can be used in hybrid electric vehicles (HEV) and electric vehicles (EV). The co-simulation model is employed in order to take full advantage of different power electronics simulation software. Specifically, the main circuit model is developed using PSIM, and the control model is developed using MATLAB/SIMULINK. An experimental 5-level hybrid inverter is tested, which is controlled by multilevel carrier-based PWM signals. The simulation yields a good estimation for the test results of the inverter.",

author = "Haiwen Liu and Tolbert, {Leon M.} and Burak Ozpineci and Zhong Du",

year = "2008",

doi = "10.1109/MWSCAS.2008.4616855",

language = "English",

isbn = "9781424421671",

series = "Midwest Symposium on Circuits and Systems",

pages = "538--541",

booktitle = "2008 IEEE International 51st Midwest Symposium on Circuits and Systems, MWSCAS",

note = "2008 IEEE International 51st Midwest Symposium on Circuits and Systems, MWSCAS ; Conference date: 10-08-2008 Through 13-08-2008",

}

Liu, H, Tolbert, LM, Ozpineci, B & Du, Z 2008, Hybrid multilevel inverter with single DC source. in 2008 IEEE International 51st Midwest Symposium on Circuits and Systems, MWSCAS., 4616855, Midwest Symposium on Circuits and Systems, pp. 538-541, 2008 IEEE International 51st Midwest Symposium on Circuits and Systems, MWSCAS, Knoxville, TN, United States, 08/10/08. https://doi.org/10.1109/MWSCAS.2008.4616855

TY - GEN

T1 - Hybrid multilevel inverter with single DC source

AU - Liu, Haiwen

AU - Tolbert, Leon M.

AU - Ozpineci, Burak

AU - Du, Zhong

PY - 2008

Y1 - 2008

N2 - A hybrid multilevel inverter model based on PSIM and MATLAB/SIMULINK is presented in this paper. It consists of a standard 3-leg inverter (one leg for each phase) and H-bridge in series with each inverter leg. The inverter can be used in hybrid electric vehicles (HEV) and electric vehicles (EV). The co-simulation model is employed in order to take full advantage of different power electronics simulation software. Specifically, the main circuit model is developed using PSIM, and the control model is developed using MATLAB/SIMULINK. An experimental 5-level hybrid inverter is tested, which is controlled by multilevel carrier-based PWM signals. The simulation yields a good estimation for the test results of the inverter.

AB - A hybrid multilevel inverter model based on PSIM and MATLAB/SIMULINK is presented in this paper. It consists of a standard 3-leg inverter (one leg for each phase) and H-bridge in series with each inverter leg. The inverter can be used in hybrid electric vehicles (HEV) and electric vehicles (EV). The co-simulation model is employed in order to take full advantage of different power electronics simulation software. Specifically, the main circuit model is developed using PSIM, and the control model is developed using MATLAB/SIMULINK. An experimental 5-level hybrid inverter is tested, which is controlled by multilevel carrier-based PWM signals. The simulation yields a good estimation for the test results of the inverter.

UR - http://www.scopus.com/inward/record.url?scp=54249146157&partnerID=8YFLogxK

U2 - 10.1109/MWSCAS.2008.4616855

DO - 10.1109/MWSCAS.2008.4616855

M3 - Conference contribution

AN - SCOPUS:54249146157

SN - 9781424421671

T3 - Midwest Symposium on Circuits and Systems

SP - 538

EP - 541

BT - 2008 IEEE International 51st Midwest Symposium on Circuits and Systems, MWSCAS

T2 - 2008 IEEE International 51st Midwest Symposium on Circuits and Systems, MWSCAS

Y2 - 10 August 2008 through 13 August 2008

ER -

Hybrid multilevel inverter with single DC source

Abstract

Publication series

Conference

UN SDGs

Access to Document

Other files and links

Fingerprint

Cite this