High volume packing fraction TRISO-based fuel in light water reactors

Nicholas R. Brown; Richard Hernandez; Andrew T. Nelson

doi:10.1016/j.pnucene.2022.104151

High volume packing fraction TRISO-based fuel in light water reactors

Nicholas R. Brown, Richard Hernandez, Andrew T. Nelson

Nuclear Energy and Fuel Cycle Division

Research output: Contribution to journal › Article › peer-review

15 Scopus citations

Abstract

For a decade, fully ceramic microencapsulated (FCM) fuel, containing tri-structural isotropic (TRISO) fuel particles in a silicon carbide (SiC) matrix, has been investigated as an accident-tolerant fuel for light water reactors (LWRs). Other examples exist of TRISO-based concepts for LWR fuels with different matrix materials. Previous studies assumed TRISO particle volume packing of approximately 0.44 in SiC (or another) matrix, the highest realistic packing fractions possible with conventional manufacturing. Recent advances in advanced manufacturing have yielded the development and demonstration of a fuel form that consists of conventionally manufactured TRISO particles in a 3D-printed SiC matrix with significantly higher possible TRISO packing fractions (0.5–0.7). This increased uranium loading enhances the viability of using TRISO-based particle fuel forms in LWRs. The viability of high-packing-fraction TRISO-based particle fuel forms in LWRs is assessed from the perspective of fuel cycle length, achievable fuel burnup, reactivity coefficients, and fuel cycle performance. Higher-packing-fraction TRISO-based fuel enables either longer cycle lengths (by ∼25% at a packing fraction of 0.55 relative to 0.44) at a constant enrichment or decreased enrichments (by ∼25% at a packing fraction of 0.55 relative to 0.44) at a constant cycle length. Studies of different fuel kernel types (uranium nitride, uranium oxycarbide, and uranium carbide) yield similar results, although the cycle length of uranium oxycarbide is shorter than for uranium nitride or uranium carbide (due to the lower density of uranium oxide). This work also characterized the production of ¹⁴C resulting from neutron absorption in ¹⁴N during operation for uranium mononitride fuel kernels; the ratio of ¹⁴C/N was 1–2 at. % at discharge. For the fuel cycle evaluation, the activity of spent nuclear fuel and high-level waste at 100 and 100,000 years was lower for high-packing-fraction fuels than for conventional LWR fuel. Environmental impact metrics were similar overall, but higher on the front end of the fuel cycle and lower on the back end of the fuel cycle. Reactivity coefficients of higher-packing-fraction TRISO-based fuel were reasonable compared with those of conventional fuels.

Original language	English
Article number	104151
Journal	Progress in Nuclear Energy
Volume	146
DOIs	https://doi.org/10.1016/j.pnucene.2022.104151
State	Published - Apr 2022

Funding

This work was supported by the United States Department of Energy Advanced Fuels Campaign . This manuscript has been authored by UT-Battelle, LLC, under contract DE-AC05-00OR22725 with the US Department of Energy (DOE). The US government retains and the publisher, by accepting the article for publication, acknowledges that the US government retains a nonexclusive, paid-up, irrevocable, worldwide license to publish or reproduce the published form of this manuscript, or allow others to do so, for US government purposes. DOE will provide public access to these results of federally sponsored research in accordance with the DOE Public Access Plan ( http://energy.gov/downloads/doe-public-access-plan ).

Keywords

Accident-tolerant fuel
Advanced manufacturing
Light water reactor
TRISO

Access to Document

10.1016/j.pnucene.2022.104151

Cite this

@article{92a4278399d04812a257a60c6e008934,

title = "High volume packing fraction TRISO-based fuel in light water reactors",

abstract = "For a decade, fully ceramic microencapsulated (FCM) fuel, containing tri-structural isotropic (TRISO) fuel particles in a silicon carbide (SiC) matrix, has been investigated as an accident-tolerant fuel for light water reactors (LWRs). Other examples exist of TRISO-based concepts for LWR fuels with different matrix materials. Previous studies assumed TRISO particle volume packing of approximately 0.44 in SiC (or another) matrix, the highest realistic packing fractions possible with conventional manufacturing. Recent advances in advanced manufacturing have yielded the development and demonstration of a fuel form that consists of conventionally manufactured TRISO particles in a 3D-printed SiC matrix with significantly higher possible TRISO packing fractions (0.5–0.7). This increased uranium loading enhances the viability of using TRISO-based particle fuel forms in LWRs. The viability of high-packing-fraction TRISO-based particle fuel forms in LWRs is assessed from the perspective of fuel cycle length, achievable fuel burnup, reactivity coefficients, and fuel cycle performance. Higher-packing-fraction TRISO-based fuel enables either longer cycle lengths (by ∼25% at a packing fraction of 0.55 relative to 0.44) at a constant enrichment or decreased enrichments (by ∼25% at a packing fraction of 0.55 relative to 0.44) at a constant cycle length. Studies of different fuel kernel types (uranium nitride, uranium oxycarbide, and uranium carbide) yield similar results, although the cycle length of uranium oxycarbide is shorter than for uranium nitride or uranium carbide (due to the lower density of uranium oxide). This work also characterized the production of 14C resulting from neutron absorption in 14N during operation for uranium mononitride fuel kernels; the ratio of 14C/N was 1–2 at. % at discharge. For the fuel cycle evaluation, the activity of spent nuclear fuel and high-level waste at 100 and 100,000 years was lower for high-packing-fraction fuels than for conventional LWR fuel. Environmental impact metrics were similar overall, but higher on the front end of the fuel cycle and lower on the back end of the fuel cycle. Reactivity coefficients of higher-packing-fraction TRISO-based fuel were reasonable compared with those of conventional fuels.",

keywords = "Accident-tolerant fuel, Advanced manufacturing, Light water reactor, TRISO",

author = "Brown, {Nicholas R.} and Richard Hernandez and Nelson, {Andrew T.}",

note = "Publisher Copyright: {\textcopyright} 2022 Elsevier Ltd",

year = "2022",

month = apr,

doi = "10.1016/j.pnucene.2022.104151",

language = "English",

volume = "146",

journal = "Progress in Nuclear Energy",

issn = "0149-1970",

publisher = "Elsevier",

}

TY - JOUR

T1 - High volume packing fraction TRISO-based fuel in light water reactors

AU - Brown, Nicholas R.

AU - Hernandez, Richard

AU - Nelson, Andrew T.

PY - 2022/4

Y1 - 2022/4

N2 - For a decade, fully ceramic microencapsulated (FCM) fuel, containing tri-structural isotropic (TRISO) fuel particles in a silicon carbide (SiC) matrix, has been investigated as an accident-tolerant fuel for light water reactors (LWRs). Other examples exist of TRISO-based concepts for LWR fuels with different matrix materials. Previous studies assumed TRISO particle volume packing of approximately 0.44 in SiC (or another) matrix, the highest realistic packing fractions possible with conventional manufacturing. Recent advances in advanced manufacturing have yielded the development and demonstration of a fuel form that consists of conventionally manufactured TRISO particles in a 3D-printed SiC matrix with significantly higher possible TRISO packing fractions (0.5–0.7). This increased uranium loading enhances the viability of using TRISO-based particle fuel forms in LWRs. The viability of high-packing-fraction TRISO-based particle fuel forms in LWRs is assessed from the perspective of fuel cycle length, achievable fuel burnup, reactivity coefficients, and fuel cycle performance. Higher-packing-fraction TRISO-based fuel enables either longer cycle lengths (by ∼25% at a packing fraction of 0.55 relative to 0.44) at a constant enrichment or decreased enrichments (by ∼25% at a packing fraction of 0.55 relative to 0.44) at a constant cycle length. Studies of different fuel kernel types (uranium nitride, uranium oxycarbide, and uranium carbide) yield similar results, although the cycle length of uranium oxycarbide is shorter than for uranium nitride or uranium carbide (due to the lower density of uranium oxide). This work also characterized the production of 14C resulting from neutron absorption in 14N during operation for uranium mononitride fuel kernels; the ratio of 14C/N was 1–2 at. % at discharge. For the fuel cycle evaluation, the activity of spent nuclear fuel and high-level waste at 100 and 100,000 years was lower for high-packing-fraction fuels than for conventional LWR fuel. Environmental impact metrics were similar overall, but higher on the front end of the fuel cycle and lower on the back end of the fuel cycle. Reactivity coefficients of higher-packing-fraction TRISO-based fuel were reasonable compared with those of conventional fuels.

AB - For a decade, fully ceramic microencapsulated (FCM) fuel, containing tri-structural isotropic (TRISO) fuel particles in a silicon carbide (SiC) matrix, has been investigated as an accident-tolerant fuel for light water reactors (LWRs). Other examples exist of TRISO-based concepts for LWR fuels with different matrix materials. Previous studies assumed TRISO particle volume packing of approximately 0.44 in SiC (or another) matrix, the highest realistic packing fractions possible with conventional manufacturing. Recent advances in advanced manufacturing have yielded the development and demonstration of a fuel form that consists of conventionally manufactured TRISO particles in a 3D-printed SiC matrix with significantly higher possible TRISO packing fractions (0.5–0.7). This increased uranium loading enhances the viability of using TRISO-based particle fuel forms in LWRs. The viability of high-packing-fraction TRISO-based particle fuel forms in LWRs is assessed from the perspective of fuel cycle length, achievable fuel burnup, reactivity coefficients, and fuel cycle performance. Higher-packing-fraction TRISO-based fuel enables either longer cycle lengths (by ∼25% at a packing fraction of 0.55 relative to 0.44) at a constant enrichment or decreased enrichments (by ∼25% at a packing fraction of 0.55 relative to 0.44) at a constant cycle length. Studies of different fuel kernel types (uranium nitride, uranium oxycarbide, and uranium carbide) yield similar results, although the cycle length of uranium oxycarbide is shorter than for uranium nitride or uranium carbide (due to the lower density of uranium oxide). This work also characterized the production of 14C resulting from neutron absorption in 14N during operation for uranium mononitride fuel kernels; the ratio of 14C/N was 1–2 at. % at discharge. For the fuel cycle evaluation, the activity of spent nuclear fuel and high-level waste at 100 and 100,000 years was lower for high-packing-fraction fuels than for conventional LWR fuel. Environmental impact metrics were similar overall, but higher on the front end of the fuel cycle and lower on the back end of the fuel cycle. Reactivity coefficients of higher-packing-fraction TRISO-based fuel were reasonable compared with those of conventional fuels.

KW - Accident-tolerant fuel

KW - Advanced manufacturing

KW - Light water reactor

KW - TRISO

UR - http://www.scopus.com/inward/record.url?scp=85124494794&partnerID=8YFLogxK

U2 - 10.1016/j.pnucene.2022.104151

DO - 10.1016/j.pnucene.2022.104151

M3 - Article

AN - SCOPUS:85124494794

SN - 0149-1970

VL - 146

JO - Progress in Nuclear Energy

JF - Progress in Nuclear Energy

M1 - 104151

ER -

High volume packing fraction TRISO-based fuel in light water reactors

Abstract

Funding

Keywords

Access to Document

Other files and links

Fingerprint

Cite this