H-mode pedestal characteristics in ITER shape discharges on DIII-D

T. H. Osborne, K. H. Burrell, R. J. Groebner, L. L. Lao, A. W. Leonard, R. Maingi, R. L. Miller, G. D. Porter, G. M. Staebler, A. D. Turnbull

Research output: Contribution to journalConference articlepeer-review

51 Scopus citations

Abstract

Characteristics of the H-mode pedestal are studied in Type I ELM discharges with ITER cross-sectional shape and aspect ratio. The scaling of the width of the edge steep gradient region, δ, which is most consistent with the data are with the normalized edge pressure, (βPOLPED)0.4. Fits of δ to a function of temperature, such as ρPOL, are ruled out in divertor pumping experiments. The edge pressure gradient is found to scale as would be expected from infinite n ballooning mode theory; however, the value of the pressure gradient exceeds the calculated first stable limit by more than a factor of 2 in some discharges. This high edge pressure gradient is consistent with access to the second stable regime for ideal ballooning for surfaces near the edge. In lower q discharges, including discharges at the ITER value of q, edge second stability requires significant edge current density. Transport simulations give edge bootstrap current of sufficient magnitude to open second stable access in these discharges. Ideal kink analysis using current density profiles including edge bootstrap current indicate that before the ELM these discharges may be unstable to low n, edge localized modes.

Original languageEnglish
Pages (from-to)131-137
Number of pages7
JournalJournal of Nuclear Materials
Volume266
DOIs
StatePublished - Mar 2 1999
Externally publishedYes

Funding

This work was supported by US Department of Energy under Contract No. DE-AC03-89ER51114.

Fingerprint

Dive into the research topics of 'H-mode pedestal characteristics in ITER shape discharges on DIII-D'. Together they form a unique fingerprint.

Cite this