Abstract
Silicon carbide is the main diffusion barrier against metallic fission products in TRISO (tristructural isotropic) coated fuel particles. The explanation of the accelerated diffusion of silver through SiC has remained a challenge for more than four decades. Although, it is now well accepted that silver diffuse through SiC by grain boundary diffusion, little is known about the characteristics of the grain boundaries in SiC and how these change depending on the type of sample. In this work five different types (coatings and wafers) of SiC produced by chemical vapor deposition were characterized by electron backscatter diffraction (EBSD). The SiC in TRISO particles had a higher concentration of high angle grain boundaries (aprox. 70%) compared to SiC wafers, which ranged between 30 and 60%. Similarly, SiC wafers had a higher concentration of low angle grain boundaries ranging between 15 and 30%, whereas TRISO particles only reached values of around 7%. The same trend remained when comparing the content of coincidence site lattice (CSL) boundaries, since SiC wafers showed a concentration of more than 30%, whilst TRISO particles had contents of around 20%. In all samples the largest fractions of CSL boundaries (3 ≤ Σ ≤ 17) were the Σ3 boundaries. We show that there are important differences between the SiC in TRISO particles and SiC wafers which could explain some of the differences observed in diffusion experiments in the literature.
Original language | English |
---|---|
Pages (from-to) | 176-183 |
Number of pages | 8 |
Journal | Journal of Nuclear Materials |
Volume | 500 |
DOIs | |
State | Published - Mar 2018 |
Externally published | Yes |
Funding
This material is based upon work supported by a grant from the University of California Institute for Mexico and the United States (UC MEXUS) and the Consejo Nacional de Ciencia y Tecnología de México (CONACYT). Authors would like to thank CONACYT for a PhD scholarship awarded to Felix Cancino Trejo. Authors would like to thank CONACYT for a PhD scholarship awarded to Felix Cancino Trejo, and DOW Electronic Materials and Joseph Somers at ITU for providing the SiC samples. This material is based upon work supported by a grant from the University of California Institute for Mexico and the United States (UC MEXUS) and the Consejo Nacional de Ciencia y Tecnología de México (CONACYT) . Authors would like to thank CONACYT for a PhD scholarship awarded to Felix Cancino Trejo. Authors would like to thank CONACYT for a PhD scholarship awarded to Felix Cancino Trejo, and DOW Electronic Materials and Joseph Somers at ITU for providing the SiC samples.