Front-End Design for SiPM-Based Monolithic Neutron Double Scatter Imagers

Joshua W. Cates, John Steele, Jon Balajthy, Victor Negut, Paul Hausladen, Klaus Ziock, Erik Brubaker

Research output: Contribution to journalArticlepeer-review

8 Scopus citations

Abstract

Neutron double scatter imaging exploits the kinematics of neutron elastic scattering to enable emission imaging of neutron sources. Due to the relatively low coincidence detection efficiency of fast neutrons in organic scintillator arrays, imaging efficiency for double scatter cameras can also be low. One method to realize significant gains in neutron coincidence detection efficiency is to develop neutron double scatter detectors which employ monolithic blocks of organic scintillator, instrumented with photosensor arrays on multiple faces to enable 3D position and multi-interaction time pickoff. Silicon photomultipliers (SiPMs) have several advantageous characteristics for this approach, including high photon detection efficiency (PDE), good single photon time resolution (SPTR), high gain that translates to single photon counting capabilities, and ability to be tiled into large arrays with high packing fraction and photosensitive area fill factor. However, they also have a tradeoff in high uncorrelated and correlated noise rates (dark counts from thermionic emissions and optical photon crosstalk generated during avalanche) which may complicate event positioning algorithms. We have evaluated the noise characteristics and SPTR of Hamamatsu S13360-6075 SiPMs with low noise, fast electronic readout for integration into a monolithic neutron scatter camera prototype. The sensors and electronic readout were implemented in a small-scale prototype detector in order to estimate expected noise performance for a monolithic neutron scatter camera and perform proof-of-concept measurements for scintillation photon counting and three-dimensional event positioning.

Original languageEnglish
Article number3553
JournalSensors (Switzerland)
Volume22
Issue number9
DOIs
StatePublished - May 1 2022

Funding

This work was funded by the US DOE National Nuclear Security Administration, Office of Defense Nuclear Nonproliferation Research and Development. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology & Engineering Solutions of Sandia, LLC, a wholly owned subsidiary of Honeywell International Inc., for the U.S. Department of Energy?s National Nuclear Security Administration under contract DE-NA0003525. This paper describes objective technical results and analysis. Any subjective views or opinions that might be expressed in the paper do not necessarily represent the views of the U.S. Department of Energy or the United States Government. Funding: This work was funded by the US DOE National Nuclear Security Administration, Office of Defense Nuclear Nonproliferation Research and Development. Acknowledgments: Sandia National Laboratories is a multimission laboratory managed and operated by National Technology & Engineering Solutions of Sandia, LLC, a wholly owned subsidiary of Honeywell International Inc., for the U.S. Department of Energy’s National Nuclear Security Administration under contract DE-NA0003525. This paper describes objective technical results and analysis. Any subjective views or opinions that might be expressed in the paper do not necessarily represent the views of the U.S. Department of Energy or the United States Government.

FundersFunder number
Office of Defense Nuclear Nonproliferation Research and Development
U.S. Department of Energy?s National Nuclear Security Administration
U.S. Department of Energy
National Nuclear Security AdministrationDE-NA0003525

    Keywords

    • monolithic scintillation detector
    • neutron double scatter imaging
    • neutron imaging
    • silicon photomultipliers

    Fingerprint

    Dive into the research topics of 'Front-End Design for SiPM-Based Monolithic Neutron Double Scatter Imagers'. Together they form a unique fingerprint.

    Cite this