Fission gas production in reactor fuels including the effects of ternary fission

Jianwei Hu, A. C. Hayes, W. B. Wilson, Rizwan-Uddin

Research output: Contribution to journalArticlepeer-review

9 Scopus citations

Abstract

An understanding of gas bubble formation and migration in nuclear fuel and its impacts on fuel and cladding materials requires knowledge of the isotopic composition of the gases and their generation rates. In this paper, we present results of simulations for the production of the dominant noble gases (helium, xenon, krypton) in nuclear fuels for different reactor core configurations and fuel compositions. The calculations were performed using detailed nuclear burn simulations with Monte Carlo nuclear transport, and included ternary fission to ensure an accurate treatment of helium production. For all reactor designs and fuels considered xenon was found to be the most dominant gas produced. Variation in the composition of fission gases is quantified for: (1) the burn time, (2) the composition of the fuel, and (3) the neutron energy spectrum. These three factors determine the relative fraction of each gas and its transmutation into or from stable gas by subsequent neutron capture.

Original languageEnglish
Pages (from-to)3751-3757
Number of pages7
JournalNuclear Engineering and Design
Volume240
Issue number11
DOIs
StatePublished - Nov 2010
Externally publishedYes

Fingerprint

Dive into the research topics of 'Fission gas production in reactor fuels including the effects of ternary fission'. Together they form a unique fingerprint.

Cite this