Abstract
We present first results of SOLEDGE-EIRENE modeling a strongly radiating plasma in the WEST tokamak. Using measurements from a reciprocating Langmuir probe we have determined the SOLEDGE input parameters, i.e. separatrix density at outboard midplane and radial transport coefficients typical of L-mode plasma. We have performed deuterium plasma simulations with presence of oxygen, injected from the core boundary into the simulation domain. The comparison between the radiated power measured from the bolometry in the divertor region and the one computed from SOLEDGE simulations seems to indicate a concentration of oxygen of about 2%. Moreover we have obtained good agreement between simulation results and experimental measurements on electron density and electron temperature profiles at the outer strike point. First qualitative analysis of spectroscopic synthetic diagnostic on Dα signals is also presented.
Original language | English |
---|---|
Article number | 100685 |
Journal | Nuclear Materials and Energy |
Volume | 20 |
DOIs | |
State | Published - Aug 2019 |
Funding
This work was granted access to the HPC resources of CINES, under the allocation 2018-A0040510482 made by GENCI and of Aix-Marseille Université financed by the project Equip@Meso (ANR-10-EQPX-29-01)of the programme “Investissements d'Avenir” supervised by the Agence Nationale pour la Recherche. This project has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement number 633053. The views and opinions expressed herein do not necessarily reflect those of the European Commission. This work was granted access to the HPC resources of CINES, under the allocation 2018-A0040510482 made by GENCI and of Aix-Marseille Université financed by the project Equip@Meso (ANR-10-EQPX-29-01) of the programme “Investissements d’Avenir” supervised by the Agence Nationale pour la Recherche. This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement number 633053 . The views and opinions expressed herein do not necessarily reflect those of the European Commission.
Keywords
- Edge tokamak plasma
- Fluid modeling
- Transport