Ferroelectric properties of La0.75Bi3.25Ti 3O12 ceramic and thin films prepared by pulsed laser deposition

Ill Won Kim; Sung Hoon Kim; Sung Lae Cho; Jong Seong Bae; Song Xue Chi; Jung Hyun Jeong; Jae Shin Lee

doi:10.1080/00150190108016004

Ferroelectric properties of La_0.75Bi_3.25Ti ₃O₁₂ ceramic and thin films prepared by pulsed laser deposition

Ill Won Kim, Sung Hoon Kim, Sung Lae Cho, Jong Seong Bae, Song Xue Chi, Jung Hyun Jeong, Jae Shin Lee

Research output: Contribution to journal › Article › peer-review

2 Scopus citations

Abstract

Bi_4-xLa_xTi₃O₁₂ ceramics with various La contents (x=0, 0.25, 0.50, 0.75, 1.00) are fabricated using ordinary firing (OF) and hot forging (HF) method. The hysteresis loop of BLT film deposited with HF[//] ceramic target displays low remnant polarization compared with that of OF ceramic target. The grain orientation of the ceramic target has a remarkable influence on the hysteresis loop of the film grown using PLD method. So, it is necessary to use the HF[⊥] ceramic target in the PLD process in order to obtain good ferroelectric properties for the film.

Original language	English
Pages (from-to)	119-124
Number of pages	6
Journal	Ferroelectrics
Volume	260
Issue number	1
DOIs	https://doi.org/10.1080/00150190108016004
State	Published - 2001
Externally published	Yes

Funding

This work was supported in part by the Ministry of Information & Communication of Korea (Support Project of University Foundation Research <2000> )supervised by IITA.

Keywords

BiLaTiO
ferroelectric thin film
grain orientation
hot-forging
pulsed laser deposition

Access to Document

10.1080/00150190108016004

Cite this

@article{ac3699cf8bbe4be086aea646810114d2,

title = "Ferroelectric properties of La0.75Bi3.25Ti 3O12 ceramic and thin films prepared by pulsed laser deposition",

abstract = "Bi4-xLaxTi3O12 ceramics with various La contents (x=0, 0.25, 0.50, 0.75, 1.00) are fabricated using ordinary firing (OF) and hot forging (HF) method. The hysteresis loop of BLT film deposited with HF[//] ceramic target displays low remnant polarization compared with that of OF ceramic target. The grain orientation of the ceramic target has a remarkable influence on the hysteresis loop of the film grown using PLD method. So, it is necessary to use the HF[⊥] ceramic target in the PLD process in order to obtain good ferroelectric properties for the film.",

keywords = "BiLaTiO, ferroelectric thin film, grain orientation, hot-forging, pulsed laser deposition",

author = "Kim, \{Ill Won\} and Kim, \{Sung Hoon\} and Cho, \{Sung Lae\} and Bae, \{Jong Seong\} and Chi, \{Song Xue\} and Jeong, \{Jung Hyun\} and Lee, \{Jae Shin\}",

year = "2001",

doi = "10.1080/00150190108016004",

language = "English",

volume = "260",

pages = "119--124",

journal = "Ferroelectrics",

issn = "0015-0193",

publisher = "Taylor and Francis Group",

number = "1",

}

TY - JOUR

T1 - Ferroelectric properties of La0.75Bi3.25Ti 3O12 ceramic and thin films prepared by pulsed laser deposition

AU - Kim, Ill Won

AU - Kim, Sung Hoon

AU - Cho, Sung Lae

AU - Bae, Jong Seong

AU - Chi, Song Xue

AU - Jeong, Jung Hyun

AU - Lee, Jae Shin

PY - 2001

Y1 - 2001

N2 - Bi4-xLaxTi3O12 ceramics with various La contents (x=0, 0.25, 0.50, 0.75, 1.00) are fabricated using ordinary firing (OF) and hot forging (HF) method. The hysteresis loop of BLT film deposited with HF[//] ceramic target displays low remnant polarization compared with that of OF ceramic target. The grain orientation of the ceramic target has a remarkable influence on the hysteresis loop of the film grown using PLD method. So, it is necessary to use the HF[⊥] ceramic target in the PLD process in order to obtain good ferroelectric properties for the film.

AB - Bi4-xLaxTi3O12 ceramics with various La contents (x=0, 0.25, 0.50, 0.75, 1.00) are fabricated using ordinary firing (OF) and hot forging (HF) method. The hysteresis loop of BLT film deposited with HF[//] ceramic target displays low remnant polarization compared with that of OF ceramic target. The grain orientation of the ceramic target has a remarkable influence on the hysteresis loop of the film grown using PLD method. So, it is necessary to use the HF[⊥] ceramic target in the PLD process in order to obtain good ferroelectric properties for the film.

KW - BiLaTiO

KW - ferroelectric thin film

KW - grain orientation

KW - hot-forging

KW - pulsed laser deposition

UR - https://www.scopus.com/pages/publications/33847205244

U2 - 10.1080/00150190108016004

DO - 10.1080/00150190108016004

M3 - Article

AN - SCOPUS:33847205244

SN - 0015-0193

VL - 260

SP - 119

EP - 124

JO - Ferroelectrics

JF - Ferroelectrics

IS - 1

ER -