Feasibility study of using an electron beam for profile measurements in the SNS accumulator ring

A. Aleksandrov; S. Assadi; S. Cousineau; V. Danilov; S. Henderson; M. Plum; P. Logatchov; A. Starostenko

doi:10.1109/PAC.2005.1591191

Feasibility study of using an electron beam for profile measurements in the SNS accumulator ring

A. Aleksandrov, S. Assadi, S. Cousineau, V. Danilov, S. Henderson, M. Plum, P. Logatchov, A. Starostenko

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

14 Scopus citations

Abstract

The electron beam probe method was suggested for measuring profiles in high power beams. In this method, deflection of a low energy electron beam by the collective field of the high intensity beam is measured. The charge density in the high intensity beam can be restored under certain conditions or estimated by various mathematical techniques. We studied the feasibility of using the electron beam probe for the SNS accumulator ring using computer simulations of the diagnostic setup. Realistic proton beam distributions were used in the simulations. Several profile calculation techniques were explored and the results are reported in this paper.

Original language	English
Title of host publication	Proceedings of the Particle Accelerator Conference, PAC 2005
Pages	2586-2588
Number of pages	3
DOIs	https://doi.org/10.1109/PAC.2005.1591191
State	Published - 2005
Externally published	Yes
Event	Particle Accelerator Conference, PAC 2005 - Knoxville, TN, United States Duration: May 16 2005 → May 20 2005

Publication series

Name	Proceedings of the IEEE Particle Accelerator Conference
Volume	2005

Conference

Conference	Particle Accelerator Conference, PAC 2005
Country/Territory	United States
City	Knoxville, TN
Period	05/16/05 → 05/20/05

Access to Document

10.1109/PAC.2005.1591191

Cite this

Aleksandrov, A., Assadi, S., Cousineau, S., Danilov, V., Henderson, S., Plum, M., Logatchov, P., & Starostenko, A. (2005). Feasibility study of using an electron beam for profile measurements in the SNS accumulator ring. In Proceedings of the Particle Accelerator Conference, PAC 2005 (pp. 2586-2588). Article 1591191 (Proceedings of the IEEE Particle Accelerator Conference; Vol. 2005). https://doi.org/10.1109/PAC.2005.1591191

@inproceedings{89e41ffa9f424e9fa80f481e3bb20554,

title = "Feasibility study of using an electron beam for profile measurements in the SNS accumulator ring",

abstract = "The electron beam probe method was suggested for measuring profiles in high power beams. In this method, deflection of a low energy electron beam by the collective field of the high intensity beam is measured. The charge density in the high intensity beam can be restored under certain conditions or estimated by various mathematical techniques. We studied the feasibility of using the electron beam probe for the SNS accumulator ring using computer simulations of the diagnostic setup. Realistic proton beam distributions were used in the simulations. Several profile calculation techniques were explored and the results are reported in this paper.",

author = "A. Aleksandrov and S. Assadi and S. Cousineau and V. Danilov and S. Henderson and M. Plum and P. Logatchov and A. Starostenko",

year = "2005",

doi = "10.1109/PAC.2005.1591191",

language = "English",

isbn = "0780388593",

series = "Proceedings of the IEEE Particle Accelerator Conference",

pages = "2586--2588",

booktitle = "Proceedings of the Particle Accelerator Conference, PAC 2005",

note = "Particle Accelerator Conference, PAC 2005 ; Conference date: 16-05-2005 Through 20-05-2005",

}

Aleksandrov, A, Assadi, S, Cousineau, S, Danilov, V, Henderson, S, Plum, M, Logatchov, P & Starostenko, A 2005, Feasibility study of using an electron beam for profile measurements in the SNS accumulator ring. in Proceedings of the Particle Accelerator Conference, PAC 2005., 1591191, Proceedings of the IEEE Particle Accelerator Conference, vol. 2005, pp. 2586-2588, Particle Accelerator Conference, PAC 2005, Knoxville, TN, United States, 05/16/05. https://doi.org/10.1109/PAC.2005.1591191

Feasibility study of using an electron beam for profile measurements in the SNS accumulator ring. / Aleksandrov, A.; Assadi, S.; Cousineau, S. et al.
Proceedings of the Particle Accelerator Conference, PAC 2005. 2005. p. 2586-2588 1591191 (Proceedings of the IEEE Particle Accelerator Conference; Vol. 2005).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Feasibility study of using an electron beam for profile measurements in the SNS accumulator ring

AU - Aleksandrov, A.

AU - Assadi, S.

AU - Cousineau, S.

AU - Danilov, V.

AU - Henderson, S.

AU - Plum, M.

AU - Logatchov, P.

AU - Starostenko, A.

PY - 2005

Y1 - 2005

N2 - The electron beam probe method was suggested for measuring profiles in high power beams. In this method, deflection of a low energy electron beam by the collective field of the high intensity beam is measured. The charge density in the high intensity beam can be restored under certain conditions or estimated by various mathematical techniques. We studied the feasibility of using the electron beam probe for the SNS accumulator ring using computer simulations of the diagnostic setup. Realistic proton beam distributions were used in the simulations. Several profile calculation techniques were explored and the results are reported in this paper.

AB - The electron beam probe method was suggested for measuring profiles in high power beams. In this method, deflection of a low energy electron beam by the collective field of the high intensity beam is measured. The charge density in the high intensity beam can be restored under certain conditions or estimated by various mathematical techniques. We studied the feasibility of using the electron beam probe for the SNS accumulator ring using computer simulations of the diagnostic setup. Realistic proton beam distributions were used in the simulations. Several profile calculation techniques were explored and the results are reported in this paper.

UR - http://www.scopus.com/inward/record.url?scp=33847166227&partnerID=8YFLogxK

U2 - 10.1109/PAC.2005.1591191

DO - 10.1109/PAC.2005.1591191

M3 - Conference contribution

AN - SCOPUS:33847166227

SN - 0780388593

SN - 9780780388598

T3 - Proceedings of the IEEE Particle Accelerator Conference

SP - 2586

EP - 2588

BT - Proceedings of the Particle Accelerator Conference, PAC 2005

T2 - Particle Accelerator Conference, PAC 2005

Y2 - 16 May 2005 through 20 May 2005

ER -

Feasibility study of using an electron beam for profile measurements in the SNS accumulator ring

Abstract

Publication series

Conference

Access to Document

Other files and links

Fingerprint

Cite this