Fabrication of the KSTAR Central Solenoid model coil (II)

Sang Ho Kim; Young Hwan Kim; Yong Hwan Kim; Han Sung Kim; Kie Hyung Chung

doi:10.1109/77.783279

Fabrication of the KSTAR Central Solenoid model coil (II)

Sang Ho Kim, Young Hwan Kim, Yong Hwan Kim, Han Sung Kim, Kie Hyung Chung

Seoul National University

Research output: Contribution to journal › Article › peer-review

4 Scopus citations

Abstract

The Korea Superconducting Tokamak Advanced Research (KSTAR) Central Solenoid (CS) model coil has been developed. The conductor type is Nb3Sn CICC (cable-in-conduit conductor). The entire manufacturing equipment and tooling have been established along with the on-line manufacturing system. The major role of the KSTAR CS model coil is to demonstrate the manufacturing feasibility of the KSTAR superconducting coils. The winding type is continuous pancake winding without joints in one coil. This paper gives a full account of the detailed manufacturing processes such as winding, jacket removing, welding, termination, heat treatment, insulation, and resin impregnation, etc.

Original language	English
Pages (from-to)	232-235
Number of pages	4
Journal	IEEE Transactions on Applied Superconductivity
Volume	9
Issue number	2 PART 1
DOIs	https://doi.org/10.1109/77.783279
State	Published - 1999
Externally published	Yes

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

Access to Document

10.1109/77.783279

Cite this

@article{425cc805ca344047ac19e51805c53957,

title = "Fabrication of the KSTAR Central Solenoid model coil (II)",

abstract = "The Korea Superconducting Tokamak Advanced Research (KSTAR) Central Solenoid (CS) model coil has been developed. The conductor type is Nb3Sn CICC (cable-in-conduit conductor). The entire manufacturing equipment and tooling have been established along with the on-line manufacturing system. The major role of the KSTAR CS model coil is to demonstrate the manufacturing feasibility of the KSTAR superconducting coils. The winding type is continuous pancake winding without joints in one coil. This paper gives a full account of the detailed manufacturing processes such as winding, jacket removing, welding, termination, heat treatment, insulation, and resin impregnation, etc.",

author = "Kim, {Sang Ho} and Kim, {Young Hwan} and Kim, {Yong Hwan} and Kim, {Han Sung} and Chung, {Kie Hyung}",

year = "1999",

doi = "10.1109/77.783279",

language = "English",

volume = "9",

pages = "232--235",

journal = "IEEE Transactions on Applied Superconductivity",

issn = "1051-8223",

publisher = "Institute of Electrical and Electronics Engineers",

number = "2 PART 1",

}

TY - JOUR

T1 - Fabrication of the KSTAR Central Solenoid model coil (II)

AU - Kim, Sang Ho

AU - Kim, Young Hwan

AU - Kim, Yong Hwan

AU - Kim, Han Sung

AU - Chung, Kie Hyung

PY - 1999

Y1 - 1999

N2 - The Korea Superconducting Tokamak Advanced Research (KSTAR) Central Solenoid (CS) model coil has been developed. The conductor type is Nb3Sn CICC (cable-in-conduit conductor). The entire manufacturing equipment and tooling have been established along with the on-line manufacturing system. The major role of the KSTAR CS model coil is to demonstrate the manufacturing feasibility of the KSTAR superconducting coils. The winding type is continuous pancake winding without joints in one coil. This paper gives a full account of the detailed manufacturing processes such as winding, jacket removing, welding, termination, heat treatment, insulation, and resin impregnation, etc.

AB - The Korea Superconducting Tokamak Advanced Research (KSTAR) Central Solenoid (CS) model coil has been developed. The conductor type is Nb3Sn CICC (cable-in-conduit conductor). The entire manufacturing equipment and tooling have been established along with the on-line manufacturing system. The major role of the KSTAR CS model coil is to demonstrate the manufacturing feasibility of the KSTAR superconducting coils. The winding type is continuous pancake winding without joints in one coil. This paper gives a full account of the detailed manufacturing processes such as winding, jacket removing, welding, termination, heat treatment, insulation, and resin impregnation, etc.

UR - http://www.scopus.com/inward/record.url?scp=0032682860&partnerID=8YFLogxK

U2 - 10.1109/77.783279

DO - 10.1109/77.783279

M3 - Article

AN - SCOPUS:0032682860

SN - 1051-8223

VL - 9

SP - 232

EP - 235

JO - IEEE Transactions on Applied Superconductivity

JF - IEEE Transactions on Applied Superconductivity

IS - 2 PART 1

ER -

Fabrication of the KSTAR Central Solenoid model coil (II)

Abstract

UN SDGs

Access to Document

Other files and links

Fingerprint

Cite this