Experimental evaluation and thermodynamic system modeling of thermoelectric heat pump clothes dryer

Viral K. Patel, Kyle R. Gluesenkamp, Dakota Goodman, Anthony Gehl

Research output: Contribution to journalArticlepeer-review

45 Scopus citations

Abstract

Electric clothes dryers consume about 6% of US residential electricity consumption. Using a solid-state technology without refrigerant, thermoelectric (TE) heat pump dryers have the potential to be more efficient than units based on electric resistance and less expensive than units based on vapor compression. This paper presents a steady state TE dryer model, and validates the model against results from an experimental prototype. The system model is composed of a TE heat pump element model coupled with a psychrometric dryer sub-model. Experimental results had energy factors (EFs) of up to 2.95 kg of dry cloth per kWh (6.51 lbc/kWh), with a dry time of 159 min. A faster dry time of 96 min was also achieved at an EF of 2.54 kgc/kWh (5.60 lbc/kWh). The model was able to replicate the experimental results within 5% of EF and 5% of dry time values. The results are used to identify important parameters that affect dryer performance, such as relative humidity of air leaving the drum.

Original languageEnglish
Pages (from-to)221-232
Number of pages12
JournalApplied Energy
Volume217
DOIs
StatePublished - May 1 2018

Funding

This work was sponsored by the U. S. Department of Energy’s Building Technologies Office under Contract No. DE-AC05-00OR22725 with UT-Battelle, LLC. The authors would like to acknowledge Mr. Antonio Bouza, Technology Manager – HVAC&R, Water Heating, and Appliance, U.S. Department of Energy Building Technologies Office.

Keywords

  • Clothes drying
  • Energy efficiency
  • Heat pump
  • Modeling
  • Thermodynamics
  • Thermoelectric

Fingerprint

Dive into the research topics of 'Experimental evaluation and thermodynamic system modeling of thermoelectric heat pump clothes dryer'. Together they form a unique fingerprint.

Cite this