TY - GEN
T1 - Evaluation of low cost titanium alloy products
AU - Barnes, John E.
AU - Peter, William
AU - Blue, Craig A.
PY - 2009
Y1 - 2009
N2 - Titanium has extremely attractive properties for air vehicles ranging from excellent corrosion resistance to good compatibility with graphite reinforced composites and very good damage tolerance characteristics. At current Buy to Fly ratios, the F-35 Program will consume as much as seven million pounds of titanium a year at rate production. This figure is nearly double that of the F-22 Program, which has a much higher titanium content. Lockheed Martin has initiated "Project Black Ti" to reduce the cost of titanium parts by reducing the titanium consumption but not the quantity of titanium parts. Ultimately, we want to reduce the inherent waste in the current processing of titanium alloy products. The Kroll process, by which most titanium product is made today, is nearly 60 years old. Kroll himself predicted the process would be replaced within 15 years due to inherent inefficiencies - in 1950. Titanium is also mis-characterized as a precious metal, which it is not. It is the ninth most abundant element on the earth's surface. Aluminum by comparison is the third most abundant but has a much more efficient method to convert it to a usable form. Until the turn of the 20th century, aluminum was considered to be as precious as platinum until the Bayer Process brought prices down from $1200/kg to $0.60/kg. Regarding titanium, one way to improve efficiency and buy less material to make the same parts is via Powder Metallurgy (PM). Until recently, titanium alloy powder was very expensive. However, new methods of producing titanium alloy have been developed which generate powder as an output versus massive ingots, which require multiple melts to achieve homogeneity. With powder, in theory, we should be able to get much closer to net shape and reduce the initial buy and reduce significant machining costs. These low cost titanium powders are becoming commercially available, which has the potential to initiate a paradigm shift in the applications of titanium. PM technologies and the consolidation of these new powders are now economically viable with the potential cost of the new powders running approximately an order of magnitude less than conventional PM grade powders. This paper will present the current status of "Project Black Ti" and its potential impact to the F-35 program.
AB - Titanium has extremely attractive properties for air vehicles ranging from excellent corrosion resistance to good compatibility with graphite reinforced composites and very good damage tolerance characteristics. At current Buy to Fly ratios, the F-35 Program will consume as much as seven million pounds of titanium a year at rate production. This figure is nearly double that of the F-22 Program, which has a much higher titanium content. Lockheed Martin has initiated "Project Black Ti" to reduce the cost of titanium parts by reducing the titanium consumption but not the quantity of titanium parts. Ultimately, we want to reduce the inherent waste in the current processing of titanium alloy products. The Kroll process, by which most titanium product is made today, is nearly 60 years old. Kroll himself predicted the process would be replaced within 15 years due to inherent inefficiencies - in 1950. Titanium is also mis-characterized as a precious metal, which it is not. It is the ninth most abundant element on the earth's surface. Aluminum by comparison is the third most abundant but has a much more efficient method to convert it to a usable form. Until the turn of the 20th century, aluminum was considered to be as precious as platinum until the Bayer Process brought prices down from $1200/kg to $0.60/kg. Regarding titanium, one way to improve efficiency and buy less material to make the same parts is via Powder Metallurgy (PM). Until recently, titanium alloy powder was very expensive. However, new methods of producing titanium alloy have been developed which generate powder as an output versus massive ingots, which require multiple melts to achieve homogeneity. With powder, in theory, we should be able to get much closer to net shape and reduce the initial buy and reduce significant machining costs. These low cost titanium powders are becoming commercially available, which has the potential to initiate a paradigm shift in the applications of titanium. PM technologies and the consolidation of these new powders are now economically viable with the potential cost of the new powders running approximately an order of magnitude less than conventional PM grade powders. This paper will present the current status of "Project Black Ti" and its potential impact to the F-35 program.
KW - Armstrong process
KW - Solid state
KW - Titanium
UR - http://www.scopus.com/inward/record.url?scp=70349522281&partnerID=8YFLogxK
U2 - 10.4028/www.scientific.net/MSF.618-619.165
DO - 10.4028/www.scientific.net/MSF.618-619.165
M3 - Conference contribution
AN - SCOPUS:70349522281
SN - 0878493271
SN - 9780878493272
T3 - Materials Science Forum
SP - 165
EP - 168
BT - 4th International Conference Organised by the CAST CRC, on Behalf of the Global Light Metals Alliance
PB - Trans Tech Publications Ltd
T2 - 4th International Conference Organised by the CAST CRC, on Behalf of the Global Light Metals Alliance
Y2 - 29 June 2009 through 1 July 2009
ER -