Energy, particle and impurity transport in quiescent double barrier discharges in DIII-D

Quiescent double barrier discharges (QDB) on DIII-D [Luxon et al., Fusion Technol. 8, Part 2A, 441 (1985)] exhibit near steady high performance (β_NH∼7) with a quiescent H-mode edge, i.e., free of edge localized modes (ELMs), but with effective particle control and strongly peaked density profiles. These QDB discharges exhibit an internal transport barrier with low ion thermal transport despite incomplete turbulence suppression. Very short correlation lengths, which reduce the transport step size, however, characterize the residual turbulence. This observation is consistent with simulations using the GLF23 [Waltz et al., Phys. Plasmas 4, 2482 (1997)] model, which reproduce the core ion temperature profile even in the presence of finite turbulence. Increased retention of high-Z impurities is observed and core nickel concentrations (an intrinsic impurity in DIII-D) are as high as 0.3%. To quantify impurity transport, trace impurity injection has been performed in steady QDB discharges showing a fast influx followed by a slow pump out. The measured decay times of the core concentration of two nonrecycling impurities, F(Z=9) and Ca(Z=22), are 299 and 675 ms, respectively, while the energy confinement time is 111 ms. Time dependent analysis of neon influx yields both diffusivities and inward convection velocities significantly greater than neoclassical predictions in the same region of the plasma where measured ion thermal transport is near neoclassical predictions yet significant turbulence is observed. The boundary of these discharges is characterized by a saturated coherent magnetohydrodynamic mode, the edge harmonic oscillation, which takes the place of ELMs in facilitating particle control by allowing particle transport to the open field lines, where both wall- and cryopumping play a major role in particle exhaust. Hot (∼5keV) ions observed in the outer scrape-off layer may enhance wall pumping.