Energy-efficient sorption-based gas clothes dryer systems

Masoud Ahmadi, Kyle R. Gluesenkamp, Sajjad Bigham

Research output: Contribution to journalArticlepeer-review

22 Scopus citations

Abstract

Standard electric resistance and fuel-driven dehydration technologies exhibit a maximum coefficient of performance of well below 1 mainly due to enthalpy losses associated with the air leaving the dehydration system. To improve energy efficiency, condensing dryer systems condense the moisture captured from a product in a closed-loop air circulation cycle. Existing condensing dehydration systems including heat pump dryers, however, need to significantly cool the air to achieve dehumidification. The added cooling and subsequent heating to return the air to a desired drying temperature consume substantial energy and thus reduce drying performance. Here, an innovative sorption-based gas dehydration system is proposed to overcome barriers deteriorating energy efficiency in existing gas, electric, or heat pump dryer systems. Decoupling latent and sensible loads, the system employs a liquid-desiccant solution to directly capture air humidity, thereby allowing circulation of the air in a closed loop to achieve high drying energy efficiency. In other words, the system captures waste latent heat from the moisture produced during the dehydration process and reuses it to improve energy efficiency. This study focuses on a comprehensive quasi-steady-state thermodynamic modeling of the proposed sorption-based dehydration concept employed for a gas clothes dryer application to predict transient response and overall drying performance (i.e., time and energy metrics). The analysis indicates the proposed sorption-based gas clothes dryer system can deliver a specific moisture extraction rate of 1.71 kg of water per kWh (i.e., a combined energy factor of 3.167 kg (6.98 lbm) of dry cloth per kWh) with a drying time of 44 min. This is a 112% energy improvement compared with state-of-the-art gas clothes dryers exhibiting a combined energy factor of 1.50 kg (3.3 lbm) of dry cloth per kWh. The technology pursued here can potentially be employed as a platform for many fuel-driven equipment to take advantage of available waste thermal energy in the environment instead of simply burning a fuel.

Original languageEnglish
Article number113763
JournalEnergy Conversion and Management
Volume230
DOIs
StatePublished - Feb 15 2021

Funding

This study was sponsored by the US Department of Energy’s Office of Energy Efficiency and Renewable Energy (EERE) under the Building Technology Office Award Number DEEE0008685. The authors would like to acknowledge Mr. Antonio Bouza, Technology Manager, Mr. Mohammed Khan, Technical Project Officer, and Mr. Michael Geocaris, Project Engineer, HVAC, Water Heating, and Appliance subprogram, Building Technologies Office, US Department of Energy. The authors also acknowledge Olivia Shafer for proofreading. This study was sponsored by the US Department of Energy's Office of Energy Efficiency and Renewable Energy (EERE) under the Building Technology Office Award Number DEEE0008685. The authors would like to acknowledge Mr. Antonio Bouza, Technology Manager, Mr. Mohammed Khan, Technical Project Officer, and Mr. Michael Geocaris, Project Engineer, HVAC, Water Heating, and Appliance subprogram, Building Technologies Office, US Department of Energy. The authors also acknowledge Olivia Shafer for proofreading.

FundersFunder number
US Department of Energy
U.S. Department of Energy
Office of Energy Efficiency and Renewable EnergyDEEE0008685
Building Technologies Office

    Keywords

    • Advanced gas clothes dryer systems
    • Dehumidification
    • Dehydration
    • Gas-driven systems
    • Moisture latent heat
    • Sorption-based systems

    Fingerprint

    Dive into the research topics of 'Energy-efficient sorption-based gas clothes dryer systems'. Together they form a unique fingerprint.

    Cite this