@inproceedings{d505cd1e88ec4cb4bb8788c650ad026c,
title = "Effects of Mn and Cr additions on the recrystallization behavior of Al-Mg-Si-Cu alloys",
abstract = "Upsetting tests on two newly developed Mn and Cr-containing Al-Mg-Si-Cu alloys with various Mn contents were carried out at a speed of 15 mm/s under upsetting temperature of 450 °C after casting and subsequent homogenization heat treatment using a 300-Tone hydraulic press. STEM experiments revealed that Mn and Cr-containing α-Al(MnCrFe)Si dispersoids formed during homogenization showed a strong pinning effect on dislocations and grain boundaries, which could effectively inhibit recovery and recrystallization during hot deformation in the two alloys. Recrystallization fractions after solution heat treatment following hot deformation were measured by EBSD technique. It was found that the recrystallization fractions of the two alloys were less than 30%, giving rise to lower recrystallization fraction in the alloy with higher amount of Mn, which had higher number density of dispersoids. This implied that the finely distributed α-dispersoids were rather stable against coarsening and they stabilized the microstructure by inhibiting dislocation recovery and recrystallization during elevated temperature exposure. Increasing the content of Mn could increase the number density as well as the aspect ratio of the dispersoids, and more significantly, the effect of retardation on recrystallization were further enhanced.",
keywords = "Al-Mg-Si-Cu aluminum alloy, Homogenization, Mn content, Mn-containing dispersoids, Recrystallization",
author = "Zhang, {Gong Wang} and Hiromi Nagaumi and Yi Han and Yi Xu and Parish, {Chad M.} and Zhai, {Tong Guang}",
note = "Publisher Copyright: {\textcopyright} 2017 Trans Tech Publications, Switzerland.; 15th International Conference on Aluminium Alloys, ICAA 2016 ; Conference date: 12-06-2016 Through 16-06-2016",
year = "2017",
doi = "10.4028/www.scientific.net/MSF.877.172",
language = "English",
isbn = "9783035710502",
series = "Materials Science Forum",
publisher = "Trans Tech Publications Ltd",
pages = "172--179",
editor = "Qing Liu and Robert Sanders and Zhihong Jia and Lingfei Cao and Jian-Feng Nie and Jian-Feng Nie",
booktitle = "The 15th International Conference on Aluminium Alloys, ICAA",
}