Skip to main navigation Skip to search Skip to main content

Effect of magneto-mechanical synergism in the process-structure correlation in Fe–C alloys: A phase-field modeling approach

  • Soumya Bandyopadhyay
  • , Sourav Chatterjee
  • , Dallas R. Trinkle
  • , Richard G. Hennig
  • , Victoria Miller
  • , Michael S. Kesler
  • , Michael R. Tonks

Research output: Contribution to journal › Article › peer-review

1 Scopus citations

Abstract

Applied magnetic fields can alter phase equilibria and kinetics in steels; however, quantitatively resolving how magnetic, chemical, and elastic driving forces jointly influence the microstructure remains challenging. We develop a quantitative magneto-mechanically coupled phase-field model for the Fe–C system that couples a CALPHAD-based chemical free energy with demagnetization-field magnetostatics and microelasticity. The model reproduces single- and multi-particle evolution during the α→γ inverse transformation at 1023 K under external fields up to 20 T, including ellipsoidal morphologies observed experimentally at 8 T. Chemically driven growth is isotropic; a magnetic interaction introduces an anisotropic driving force that elongates γ precipitates along the field into ellipsoids, while elastic coherency promotes faceting, yielding elongated cuboidal or “brick-like” particles under combined magneto-elastic coupling. Growth kinetics increase with C content, and decrease with field strength and misfit strain. Multi-particle simulations reveal dipolar interaction-mediated coalescence for field-parallel neighbors and ripening for field-perpendicular neighbors. Incorporating field-dependent diffusivity from experiment slows kinetics as expected; a first-principles-motivated anisotropic diffusivity correction is estimated to be small (<2%). These results establish a process-structure link for magnetically assisted heat treatments of Fe–C alloys and provide guidance for microstructure control via chemo-magneto-mechanical synergism.

Original languageEnglish
Article number122126
JournalActa Materialia
Volume309
DOIs
StatePublished - May 1 2026

Funding

The authors acknowledge the U.S. Department of Energy Office of Energy Efficiency and Renewable Energy (EERE) under the Advanced Manufacturing Office award number DE-EE0009131 for sponsoring the project. We also acknowledge the ‘High Performance Computation Facility-HiPerGator’ at University of Florida for providing the computational resources to perform the simulations. Finally, we are grateful for the leadership of Dr. Michele Manuel on the project. The author (SB) also acknowledges Dr. Vishal Yadav for carefully going through the manuscript and providing valuable feedback. This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of its employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency thereof. The views and opinions of the authors expressed herein do not necessarily state or reflect those of the United States Government or any agency thereof.

Keywords

  • Magnetic field
  • Microelasticity
  • Phase field model
  • Phase transformation
  • Steel

Fingerprint

Dive into the research topics of 'Effect of magneto-mechanical synergism in the process-structure correlation in Fe–C alloys: A phase-field modeling approach'. Together they form a unique fingerprint.

Cite this