Dynamic behavior of PEM FCPPs under various load conditions and voltage stability analysis for stand-alone residential applications

M. Uzunoglu; O. C. Onar; M. S. Alam

doi:10.1016/j.jpowsour.2007.02.045

Dynamic behavior of PEM FCPPs under various load conditions and voltage stability analysis for stand-alone residential applications

M. Uzunoglu, O. C. Onar, M. S. Alam

Research output: Contribution to journal › Article › peer-review

26 Scopus citations

Abstract

In this paper, dynamic behavior and performance of a fuel cell power plant (FCPP) which operates in parallel with a battery bank is tested under classified load conditions, such as mostly resistive, mostly inductive, resistive-inductive and non-linear loads. Thereafter, voltage stability analysis is performed using the dynamic response of the FCPP for stand-alone residential applications. Simulation results are obtained using the MATLAB^® and Simulink^® software packages, based on the mathematical and dynamic electrical models of the system. Using the experimental results, a validated model has been realized and voltage stability analysis is performed through this model.

Original language	English
Pages (from-to)	240-250
Number of pages	11
Journal	Journal of Power Sources
Volume	168
Issue number	1 SPEC. ISS.
DOIs	https://doi.org/10.1016/j.jpowsour.2007.02.045
State	Published - May 25 2007
Externally published	Yes

Funding

This work was supported in part by the U.S. Department of Energy under Grant DE-FG02-05CH11295.

Funders	Funder number
U.S. Department of Energy	DE-FG02-05CH11295

Keywords

Fuel cell
Load conditions
PEM FCPP
Reactive power
Stand-alone
Voltage stability

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

Access to Document

10.1016/j.jpowsour.2007.02.045

Cite this

@article{dbde7db307ee4343b10b7e17e39ade0f,

title = "Dynamic behavior of PEM FCPPs under various load conditions and voltage stability analysis for stand-alone residential applications",

abstract = "In this paper, dynamic behavior and performance of a fuel cell power plant (FCPP) which operates in parallel with a battery bank is tested under classified load conditions, such as mostly resistive, mostly inductive, resistive-inductive and non-linear loads. Thereafter, voltage stability analysis is performed using the dynamic response of the FCPP for stand-alone residential applications. Simulation results are obtained using the MATLAB{\textregistered} and Simulink{\textregistered} software packages, based on the mathematical and dynamic electrical models of the system. Using the experimental results, a validated model has been realized and voltage stability analysis is performed through this model.",

keywords = "Fuel cell, Load conditions, PEM FCPP, Reactive power, Stand-alone, Voltage stability",

author = "M. Uzunoglu and Onar, {O. C.} and Alam, {M. S.}",

year = "2007",

month = may,

day = "25",

doi = "10.1016/j.jpowsour.2007.02.045",

language = "English",

volume = "168",

pages = "240--250",

journal = "Journal of Power Sources",

issn = "0378-7753",

publisher = "Elsevier",

number = "1 SPEC. ISS.",

}

TY - JOUR

T1 - Dynamic behavior of PEM FCPPs under various load conditions and voltage stability analysis for stand-alone residential applications

AU - Uzunoglu, M.

AU - Onar, O. C.

AU - Alam, M. S.

PY - 2007/5/25

Y1 - 2007/5/25

N2 - In this paper, dynamic behavior and performance of a fuel cell power plant (FCPP) which operates in parallel with a battery bank is tested under classified load conditions, such as mostly resistive, mostly inductive, resistive-inductive and non-linear loads. Thereafter, voltage stability analysis is performed using the dynamic response of the FCPP for stand-alone residential applications. Simulation results are obtained using the MATLAB® and Simulink® software packages, based on the mathematical and dynamic electrical models of the system. Using the experimental results, a validated model has been realized and voltage stability analysis is performed through this model.

AB - In this paper, dynamic behavior and performance of a fuel cell power plant (FCPP) which operates in parallel with a battery bank is tested under classified load conditions, such as mostly resistive, mostly inductive, resistive-inductive and non-linear loads. Thereafter, voltage stability analysis is performed using the dynamic response of the FCPP for stand-alone residential applications. Simulation results are obtained using the MATLAB® and Simulink® software packages, based on the mathematical and dynamic electrical models of the system. Using the experimental results, a validated model has been realized and voltage stability analysis is performed through this model.

KW - Fuel cell

KW - Load conditions

KW - PEM FCPP

KW - Reactive power

KW - Stand-alone

KW - Voltage stability

UR - http://www.scopus.com/inward/record.url?scp=34247391159&partnerID=8YFLogxK

U2 - 10.1016/j.jpowsour.2007.02.045

DO - 10.1016/j.jpowsour.2007.02.045

M3 - Article

AN - SCOPUS:34247391159

SN - 0378-7753

VL - 168

SP - 240

EP - 250

JO - Journal of Power Sources

JF - Journal of Power Sources

IS - 1 SPEC. ISS.

ER -

Dynamic behavior of PEM FCPPs under various load conditions and voltage stability analysis for stand-alone residential applications

Abstract

Funding

Keywords

UN SDGs

Access to Document

Other files and links

Fingerprint

Cite this