Diffuse vacuum arc with cerium oxide hot cathode

R. Kh Amirov, N. A. Vorona, A. V. Gavrikov, G. D. Liziakin, V. P. Polistchook, I. S. Samoylov, V. P. Smirnov, R. A. Usmanov, I. M. Yartsev, A. S. Ivanov

Research output: Contribution to journalConference articlepeer-review

2 Scopus citations

Abstract

Diffuse vacuum arc with hot cathode is one of the perspective plasma sources for the development of spent nuclear fuel plasma reprocessing technology. Experimental data is known for such type of discharges on metal cathodes. In this work discharge with cerium dioxide hot cathode was studied. Cerium dioxide properties are similar to uranium dioxide. Its feature as dielectric is that it becomes conductive in oxygen-free atmosphere. Vacuum arc was studied at following parameters: cathode temperatures were between 2.0 and 2.2 kK, discharge currents was between 30 and 65 A and voltages was in range from 15 to 25 V. Power flows from plasma to cathode were estimated in achieved regimes. Analysis of generated plasma component composition was made by radiation spectrum diagnostics. These results were compared with calculations of equilibrium gaseous phase above solid sample of cerium dioxide in close to experimental conditions. Cerium dioxide vacuum evaporation rate and evaporation rate in arc were measured.

Original languageEnglish
Article number012190
JournalJournal of Physics: Conference Series
Volume774
Issue number1
DOIs
StatePublished - Nov 27 2016
Externally publishedYes
Event31st International Conference on Equations of State for Matter, ELBRUS 2016 - Elbrus, Russian Federation
Duration: Mar 1 2016Mar 6 2016

Funding

The study was supported by grant from the Russian Science Foundation (project No. 14-29-00231).

Fingerprint

Dive into the research topics of 'Diffuse vacuum arc with cerium oxide hot cathode'. Together they form a unique fingerprint.

Cite this