Design and fabrication of an FEL injector cryomodule

J. Rathke; A. Ambrosio; M. Cole; E. Peterson; T. Schultheiss; H. Bluem; A. M.M. Todd; I. Campisi; E. Daly; J. Hogan; J. Mammosser; G. Neil; J. Preble; R. Rimmer; C. Rode; J. Sekutowicz; T. Whitlatch; M. Wiseman

doi:10.1109/PAC.2005.1591595

Design and fabrication of an FEL injector cryomodule

J. Rathke
, A. Ambrosio
, M. Cole
, E. Peterson
, T. Schultheiss
, H. Bluem
, A. M.M. Todd
, I. Campisi
, E. Daly
, J. Hogan
, J. Mammosser
, G. Neil
, J. Preble
, R. Rimmer
, C. Rode
, J. Sekutowicz
, T. Whitlatch
, M. Wiseman

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Scopus citations

Abstract

Advanced Energy Systems has recently completed the design of a four cavity cryomodule for use as an FEL injector accelerator on the JLAB Injector Test Stand. Fabrication is nearing completion. Four 748.5 MHz single cell superconducting cavities have been completed and are currently at Jefferson Lab for final processing and test prior to integration in the module. This paper will review the design and fabrication of the cavities and cryomodule.

Original language	English
Title of host publication	Proceedings of the Particle Accelerator Conference, PAC 2005
Pages	3724-3726
Number of pages	3
DOIs	https://doi.org/10.1109/PAC.2005.1591595
State	Published - 2005
Event	Particle Accelerator Conference, PAC 2005 - Knoxville, TN, United States Duration: May 16 2005 → May 20 2005

Publication series

Name	Proceedings of the IEEE Particle Accelerator Conference
Volume	2005

Conference

Conference	Particle Accelerator Conference, PAC 2005
Country/Territory	United States
City	Knoxville, TN
Period	05/16/05 → 05/20/05

Access to Document

10.1109/PAC.2005.1591595

Cite this

Rathke, J., Ambrosio, A., Cole, M., Peterson, E., Schultheiss, T., Bluem, H., Todd, A. M. M., Campisi, I., Daly, E., Hogan, J., Mammosser, J., Neil, G., Preble, J., Rimmer, R., Rode, C., Sekutowicz, J., Whitlatch, T., & Wiseman, M. (2005). Design and fabrication of an FEL injector cryomodule. In Proceedings of the Particle Accelerator Conference, PAC 2005 (pp. 3724-3726). Article 1591595 (Proceedings of the IEEE Particle Accelerator Conference; Vol. 2005). https://doi.org/10.1109/PAC.2005.1591595

@inproceedings{a959684ff7af48dca6efd3ef2c23175d,

title = "Design and fabrication of an FEL injector cryomodule",

abstract = "Advanced Energy Systems has recently completed the design of a four cavity cryomodule for use as an FEL injector accelerator on the JLAB Injector Test Stand. Fabrication is nearing completion. Four 748.5 MHz single cell superconducting cavities have been completed and are currently at Jefferson Lab for final processing and test prior to integration in the module. This paper will review the design and fabrication of the cavities and cryomodule.",

author = "J. Rathke and A. Ambrosio and M. Cole and E. Peterson and T. Schultheiss and H. Bluem and Todd, \{A. M.M.\} and I. Campisi and E. Daly and J. Hogan and J. Mammosser and G. Neil and J. Preble and R. Rimmer and C. Rode and J. Sekutowicz and T. Whitlatch and M. Wiseman",

year = "2005",

doi = "10.1109/PAC.2005.1591595",

language = "English",

isbn = "0780388593",

series = "Proceedings of the IEEE Particle Accelerator Conference",

pages = "3724--3726",

booktitle = "Proceedings of the Particle Accelerator Conference, PAC 2005",

note = "Particle Accelerator Conference, PAC 2005 ; Conference date: 16-05-2005 Through 20-05-2005",

}

Rathke, J, Ambrosio, A, Cole, M, Peterson, E, Schultheiss, T, Bluem, H, Todd, AMM, Campisi, I, Daly, E, Hogan, J, Mammosser, J, Neil, G, Preble, J, Rimmer, R, Rode, C, Sekutowicz, J, Whitlatch, T & Wiseman, M 2005, Design and fabrication of an FEL injector cryomodule. in Proceedings of the Particle Accelerator Conference, PAC 2005., 1591595, Proceedings of the IEEE Particle Accelerator Conference, vol. 2005, pp. 3724-3726, Particle Accelerator Conference, PAC 2005, Knoxville, TN, United States, 05/16/05. https://doi.org/10.1109/PAC.2005.1591595

TY - GEN

T1 - Design and fabrication of an FEL injector cryomodule

AU - Rathke, J.

AU - Ambrosio, A.

AU - Cole, M.

AU - Peterson, E.

AU - Schultheiss, T.

AU - Bluem, H.

AU - Todd, A. M.M.

AU - Campisi, I.

AU - Daly, E.

AU - Hogan, J.

AU - Mammosser, J.

AU - Neil, G.

AU - Preble, J.

AU - Rimmer, R.

AU - Rode, C.

AU - Sekutowicz, J.

AU - Whitlatch, T.

AU - Wiseman, M.

PY - 2005

Y1 - 2005

N2 - Advanced Energy Systems has recently completed the design of a four cavity cryomodule for use as an FEL injector accelerator on the JLAB Injector Test Stand. Fabrication is nearing completion. Four 748.5 MHz single cell superconducting cavities have been completed and are currently at Jefferson Lab for final processing and test prior to integration in the module. This paper will review the design and fabrication of the cavities and cryomodule.

AB - Advanced Energy Systems has recently completed the design of a four cavity cryomodule for use as an FEL injector accelerator on the JLAB Injector Test Stand. Fabrication is nearing completion. Four 748.5 MHz single cell superconducting cavities have been completed and are currently at Jefferson Lab for final processing and test prior to integration in the module. This paper will review the design and fabrication of the cavities and cryomodule.

UR - https://www.scopus.com/pages/publications/33847124526

U2 - 10.1109/PAC.2005.1591595

DO - 10.1109/PAC.2005.1591595

M3 - Conference contribution

AN - SCOPUS:33847124526

SN - 0780388593

SN - 9780780388598

T3 - Proceedings of the IEEE Particle Accelerator Conference

SP - 3724

EP - 3726

BT - Proceedings of the Particle Accelerator Conference, PAC 2005

T2 - Particle Accelerator Conference, PAC 2005

Y2 - 16 May 2005 through 20 May 2005

ER -

Design and fabrication of an FEL injector cryomodule

Abstract

Publication series

Conference

Access to Document

Other files and links

Fingerprint

Cite this