TY - GEN
T1 - Design and analysis of a 55-kW air-cooled automotive traction drive inverter
AU - Chinthavali, Madhu
AU - Tawfik, Jonathan A.
AU - Arimilli, Rao V.
PY - 2011
Y1 - 2011
N2 - The purpose of this study is to determine the thermal feasibility of an air-cooled 55-kW power inverter with SiC devices. Air flow rate, ambient air temperature, voltage, and device switching frequency were studied parametrically by performing transient and steady-state simulations. The transient simulations were based on inverter current that represents the US06 supplemental federal test procedure from the US EPA. The results demonstrate the thermal feasibility of using air to cool a cylindrical-shaped 55-kW SiC traction drive inverter with axial-flow of air. When the inverter model is subject to one or multiple current cycles, the maximum device temperature does not exceed 164°C (327°F) for an inlet flow rate of 270 cfm, ambient temperature of 120°C, voltage of 650 V, and switching frequency of 20 kHz. The results show that the ideal blower power input for the entire inverter with a total inlet air flow rate of 540 cfm is 312 W.
AB - The purpose of this study is to determine the thermal feasibility of an air-cooled 55-kW power inverter with SiC devices. Air flow rate, ambient air temperature, voltage, and device switching frequency were studied parametrically by performing transient and steady-state simulations. The transient simulations were based on inverter current that represents the US06 supplemental federal test procedure from the US EPA. The results demonstrate the thermal feasibility of using air to cool a cylindrical-shaped 55-kW SiC traction drive inverter with axial-flow of air. When the inverter model is subject to one or multiple current cycles, the maximum device temperature does not exceed 164°C (327°F) for an inlet flow rate of 270 cfm, ambient temperature of 120°C, voltage of 650 V, and switching frequency of 20 kHz. The results show that the ideal blower power input for the entire inverter with a total inlet air flow rate of 540 cfm is 312 W.
UR - https://www.scopus.com/pages/publications/81855228750
U2 - 10.1109/ECCE.2011.6064080
DO - 10.1109/ECCE.2011.6064080
M3 - Conference contribution
AN - SCOPUS:81855228750
SN - 9781457705427
T3 - IEEE Energy Conversion Congress and Exposition: Energy Conversion Innovation for a Clean Energy Future, ECCE 2011, Proceedings
SP - 2345
EP - 2352
BT - IEEE Energy Conversion Congress and Exposition
T2 - 3rd Annual IEEE Energy Conversion Congress and Exposition, ECCE 2011
Y2 - 17 September 2011 through 22 September 2011
ER -