Damage and size effect during superplastic deformation

M. B. Taylor, H. M. Zbib, M. A. Khaleel

Research output: Contribution to journalArticlepeer-review

70 Scopus citations

Abstract

Superplastic forming is a valuable metal working technique because of the extreme ductility that can be achieved. However, it is limited in application due to the presence of small voids that grow and coalesce during the forming process, often causing premature failure. In order to understand and control this phenomenon accurate constitutive models must be developed which account for void parameters that affect the macroscopic behavior of the material. This paper looks specifically at the effect of void size and spacing on the ductility and flow stress of viscoplastic materials. Based on the gradient-dependent theory of plasticity, a model is proposed that accounts for size effects by incorporating strain gradient terms into a continuum based constitutive equation. Both experimental testing and finite element (FE) modeling were performed on Pb-Sn, tensile specimens with small holes drilled in them in random patterns. The experimental tests indicate that a decrease in void size results in an increase in ductility. The FE results demonstrate that the gradient terms strengthen the material by diffusing the strain in areas of high strain concentration and delay failure by slowing void growth. In addition, the model predicted an increase in ductility and flow stress with decreasing void size.

Original languageEnglish
Pages (from-to)415-442
Number of pages28
JournalInternational Journal of Plasticity
Volume18
Issue number3
DOIs
StatePublished - 2002
Externally publishedYes

Keywords

  • A. Ductility
  • A. Voids and inclusions
  • B. Constitutive behavior
  • B. Viscoplastic material
  • C. Finite elements

Fingerprint

Dive into the research topics of 'Damage and size effect during superplastic deformation'. Together they form a unique fingerprint.

Cite this