Corrigendum to “Numerical modeling of heat-transfer and the influence of process parameters on tailoring the grain morphology of IN718 in electron beam additive manufacturing” [Acta Mater. 112C (2016) 303–314], (S1359645416302294), (10.1016/j.actamat.2016.03.063))

Narendran Raghavan; Sudarsanam S. Babu; Ryan Dehoff; Sreekanth Pannala; Srdjan Simunovic; Michael Kirka; John Turner; Neil Carlson

doi:10.1016/j.actamat.2017.08.067

Corrigendum to “Numerical modeling of heat-transfer and the influence of process parameters on tailoring the grain morphology of IN718 in electron beam additive manufacturing” [Acta Mater. 112C (2016) 303–314], (S1359645416302294), (10.1016/j.actamat.2016.03.063))

Narendran Raghavan
, Sudarsanam S. Babu
, Ryan Dehoff
, Sreekanth Pannala
, Srdjan Simunovic
, Michael Kirka
, John Turner
, Neil Carlson

Research output: Contribution to journal › Comment/debate

4 Scopus citations

Abstract

The authors regret an error in equation 14. The power term (3/3.4) has to be inside the braces and the value has to be -2.358E19 instead of -2.358E18. The correct equation is given below. [Formula presnted] Since the calculations in this paper were done by directly substituting the values in equation 13, this correction does not affect any other results and conclusions of the paper. The authors would like to apologise for any inconvenience caused.

Original language	English
Pages (from-to)	472
Number of pages	1
Journal	Acta Materialia
Volume	140
DOIs	https://doi.org/10.1016/j.actamat.2017.08.067
State	Published - Nov 2017

Access to Document

10.1016/j.actamat.2017.08.067

Fingerprint

Dive into the research topics of 'Corrigendum to “Numerical modeling of heat-transfer and the influence of process parameters on tailoring the grain morphology of IN718 in electron beam additive manufacturing” [Acta Mater. 112C (2016) 303–314], (S1359645416302294), (10.1016/j.actamat.2016.03.063))'. Together they form a unique fingerprint.

Cite this

Raghavan, N., Babu, S. S., Dehoff, R., Pannala, S., Simunovic, S., Kirka, M., Turner, J., & Carlson, N. (2017). Corrigendum to “Numerical modeling of heat-transfer and the influence of process parameters on tailoring the grain morphology of IN718 in electron beam additive manufacturing” [Acta Mater. 112C (2016) 303–314], (S1359645416302294), (10.1016/j.actamat.2016.03.063)). Acta Materialia, 140, 472. https://doi.org/10.1016/j.actamat.2017.08.067

Raghavan, Narendran ; Babu, Sudarsanam S. ; Dehoff, Ryan et al. / Corrigendum to “Numerical modeling of heat-transfer and the influence of process parameters on tailoring the grain morphology of IN718 in electron beam additive manufacturing” [Acta Mater. 112C (2016) 303–314], (S1359645416302294), (10.1016/j.actamat.2016.03.063)). In: Acta Materialia. 2017 ; Vol. 140. pp. 472.

@article{224b2e97ad5c4e1d9409c7bbf135db34,

title = "Corrigendum to “Numerical modeling of heat-transfer and the influence of process parameters on tailoring the grain morphology of IN718 in electron beam additive manufacturing” [Acta Mater. 112C (2016) 303–314], (S1359645416302294), (10.1016/j.actamat.2016.03.063))",

abstract = "The authors regret an error in equation 14. The power term (3/3.4) has to be inside the braces and the value has to be -2.358E19 instead of -2.358E18. The correct equation is given below. [Formula presnted] Since the calculations in this paper were done by directly substituting the values in equation 13, this correction does not affect any other results and conclusions of the paper. The authors would like to apologise for any inconvenience caused.",

author = "Narendran Raghavan and Babu, \{Sudarsanam S.\} and Ryan Dehoff and Sreekanth Pannala and Srdjan Simunovic and Michael Kirka and John Turner and Neil Carlson",

note = "Publisher Copyright: {\textcopyright} 2016 Acta Materialia Inc.",

year = "2017",

month = nov,

doi = "10.1016/j.actamat.2017.08.067",

language = "English",

volume = "140",

pages = "472",

journal = "Acta Materialia",

issn = "1359-6454",

publisher = "Elsevier",

}

Raghavan, N, Babu, SS, Dehoff, R, Pannala, S, Simunovic, S , Kirka, M, Turner, J & Carlson, N 2017, 'Corrigendum to “Numerical modeling of heat-transfer and the influence of process parameters on tailoring the grain morphology of IN718 in electron beam additive manufacturing” [Acta Mater. 112C (2016) 303–314], (S1359645416302294), (10.1016/j.actamat.2016.03.063))', Acta Materialia, vol. 140, pp. 472. https://doi.org/10.1016/j.actamat.2017.08.067

Corrigendum to “Numerical modeling of heat-transfer and the influence of process parameters on tailoring the grain morphology of IN718 in electron beam additive manufacturing” [Acta Mater. 112C (2016) 303–314], (S1359645416302294), (10.1016/j.actamat.2016.03.063)). / Raghavan, Narendran; Babu, Sudarsanam S.; Dehoff, Ryan et al.
In: Acta Materialia, Vol. 140, 11.2017, p. 472.

Research output: Contribution to journal › Comment/debate

TY - JOUR

T1 - Corrigendum to “Numerical modeling of heat-transfer and the influence of process parameters on tailoring the grain morphology of IN718 in electron beam additive manufacturing” [Acta Mater. 112C (2016) 303–314], (S1359645416302294), (10.1016/j.actamat.2016.03.063))

AU - Raghavan, Narendran

AU - Babu, Sudarsanam S.

AU - Dehoff, Ryan

AU - Pannala, Sreekanth

AU - Simunovic, Srdjan

AU - Kirka, Michael

AU - Turner, John

AU - Carlson, Neil

PY - 2017/11

Y1 - 2017/11

N2 - The authors regret an error in equation 14. The power term (3/3.4) has to be inside the braces and the value has to be -2.358E19 instead of -2.358E18. The correct equation is given below. [Formula presnted] Since the calculations in this paper were done by directly substituting the values in equation 13, this correction does not affect any other results and conclusions of the paper. The authors would like to apologise for any inconvenience caused.

AB - The authors regret an error in equation 14. The power term (3/3.4) has to be inside the braces and the value has to be -2.358E19 instead of -2.358E18. The correct equation is given below. [Formula presnted] Since the calculations in this paper were done by directly substituting the values in equation 13, this correction does not affect any other results and conclusions of the paper. The authors would like to apologise for any inconvenience caused.

UR - https://www.scopus.com/pages/publications/85029184421

U2 - 10.1016/j.actamat.2017.08.067

DO - 10.1016/j.actamat.2017.08.067

M3 - Comment/debate

AN - SCOPUS:85029184421

SN - 1359-6454

VL - 140

SP - 472

JO - Acta Materialia

JF - Acta Materialia

ER -

Raghavan N, Babu SS, Dehoff R, Pannala S, Simunovic S , Kirka M et al. Corrigendum to “Numerical modeling of heat-transfer and the influence of process parameters on tailoring the grain morphology of IN718 in electron beam additive manufacturing” [Acta Mater. 112C (2016) 303–314], (S1359645416302294), (10.1016/j.actamat.2016.03.063)). Acta Materialia. 2017 Nov;140:472. doi: 10.1016/j.actamat.2017.08.067

Corrigendum to “Numerical modeling of heat-transfer and the influence of process parameters on tailoring the grain morphology of IN718 in electron beam additive manufacturing” [Acta Mater. 112C (2016) 303–314], (S1359645416302294), (10.1016/j.actamat.2016.03.063))

Abstract

Access to Document

Other files and links

Fingerprint

Cite this