Contactless power transfer system for sealed lead acid battery charging

Gautam Rituraj; Brijesh Kumar Kushwaha; Praveen Kumar

doi:10.1017/wpt.2017.18

Contactless power transfer system for sealed lead acid battery charging

Gautam Rituraj, Brijesh Kumar Kushwaha, Praveen Kumar

Research output: Contribution to journal › Article › peer-review

2 Scopus citations

Abstract

In this paper, an experimental study is carried out while charging the sealed lead acid battery bank using a series-parallel (SP) compensated contactless power transfer (CPT) system. Constant current (CC) and constant voltage (CV) modes are used for charging the battery bank. An expression of optimum operating frequency is derived to maintain the maximum compensated coil efficiency throughout the load variation in charging process. An experimental setup of SP compensated CPT system is built for charging the battery bank. The variation of compensated coil efficiency and the load phase angle with respect to different operating frequencies in CC and CV modes is verified with the measurement. Based on the analysis, the control parameters are identified.

Original language	English
Pages (from-to)	20-26
Number of pages	7
Journal	Wireless Power Transfer
Volume	5
Issue number	1
DOIs	https://doi.org/10.1017/wpt.2017.18
State	Published - Mar 1 2018
Externally published	Yes

Keywords

Battery charging
Contactless power transfer system
Maximum efficiency
Optimum operating frequency
SP compensation

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

Access to Document

10.1017/wpt.2017.18

Cite this

@article{1108296bf33d407bafac454216605ed8,

title = "Contactless power transfer system for sealed lead acid battery charging",

abstract = "In this paper, an experimental study is carried out while charging the sealed lead acid battery bank using a series-parallel (SP) compensated contactless power transfer (CPT) system. Constant current (CC) and constant voltage (CV) modes are used for charging the battery bank. An expression of optimum operating frequency is derived to maintain the maximum compensated coil efficiency throughout the load variation in charging process. An experimental setup of SP compensated CPT system is built for charging the battery bank. The variation of compensated coil efficiency and the load phase angle with respect to different operating frequencies in CC and CV modes is verified with the measurement. Based on the analysis, the control parameters are identified.",

keywords = "Battery charging, Contactless power transfer system, Maximum efficiency, Optimum operating frequency, SP compensation",

author = "Gautam Rituraj and Kushwaha, {Brijesh Kumar} and Praveen Kumar",

note = "Publisher Copyright: {\textcopyright} 2017 Cambridge University Press.",

year = "2018",

month = mar,

day = "1",

doi = "10.1017/wpt.2017.18",

language = "English",

volume = "5",

pages = "20--26",

journal = "Wireless Power Transfer",

issn = "2052-8418",

publisher = "Hindawi",

number = "1",

}

TY - JOUR

T1 - Contactless power transfer system for sealed lead acid battery charging

AU - Rituraj, Gautam

AU - Kushwaha, Brijesh Kumar

AU - Kumar, Praveen

PY - 2018/3/1

Y1 - 2018/3/1

N2 - In this paper, an experimental study is carried out while charging the sealed lead acid battery bank using a series-parallel (SP) compensated contactless power transfer (CPT) system. Constant current (CC) and constant voltage (CV) modes are used for charging the battery bank. An expression of optimum operating frequency is derived to maintain the maximum compensated coil efficiency throughout the load variation in charging process. An experimental setup of SP compensated CPT system is built for charging the battery bank. The variation of compensated coil efficiency and the load phase angle with respect to different operating frequencies in CC and CV modes is verified with the measurement. Based on the analysis, the control parameters are identified.

AB - In this paper, an experimental study is carried out while charging the sealed lead acid battery bank using a series-parallel (SP) compensated contactless power transfer (CPT) system. Constant current (CC) and constant voltage (CV) modes are used for charging the battery bank. An expression of optimum operating frequency is derived to maintain the maximum compensated coil efficiency throughout the load variation in charging process. An experimental setup of SP compensated CPT system is built for charging the battery bank. The variation of compensated coil efficiency and the load phase angle with respect to different operating frequencies in CC and CV modes is verified with the measurement. Based on the analysis, the control parameters are identified.

KW - Battery charging

KW - Contactless power transfer system

KW - Maximum efficiency

KW - Optimum operating frequency

KW - SP compensation

UR - http://www.scopus.com/inward/record.url?scp=85061883976&partnerID=8YFLogxK

U2 - 10.1017/wpt.2017.18

DO - 10.1017/wpt.2017.18

M3 - Article

AN - SCOPUS:85061883976

SN - 2052-8418

VL - 5

SP - 20

EP - 26

JO - Wireless Power Transfer

JF - Wireless Power Transfer

IS - 1

ER -

Contactless power transfer system for sealed lead acid battery charging

Abstract

Keywords

UN SDGs

Access to Document

Other files and links

Fingerprint

Cite this